Audi A6 (4F) Central Electronics

Coding

• 0?xxxxx: Steering Column Memory
  • 0 = Steering Column Memory not installed or manual Steering Column
  • 1 = Steering Column Memory installed
• 0x?xxxx: Footwell Lightning
  • 0 = Footwell Lightning using Light Bulbs
  • 1 = Footwell Lightning using LED's
• 0xx?xxx: Headlight Type
  • 0 = Halogen Headlights w/o Headlight Washer System
  • 1 = Halogen Headlights with Headlight Washer System
  • 2 = Bi-Xenon Headlights
  • 3 = Bi-Xenon Headlights with AFS
  • 4 = Bi-Xenon Headlights w/o Headlight Washer System
  • 5 = LED Daytime Running Lights with Headlight Washer System
  • 6 = LED Daytime Running Lights w/o Headlight Washer System
• 0xxx?xx: Automatic Driving Light
  • 0 = w/o Automatic Driving Light (Auto)
  • 1 = with Automatic Driving Light (Auto) with Rain/Light Sensor (G397)
• 0xxxx?x: Daytime Running Lights
  • 0 = w/o Daytime Running Lights
  • 1 = with Daytime Running Lights (not selectable via MMI)
  • 2 = with Daytime Running Lights (selectable via MMI)
• 0xxxxx?: Country
  • 1 = Rest of World (RoW)
  • 2 = Northern European Countries (Sweden/Finland/Norway/Denmark)
  • 3 = USA
  • 4 = Canada

Security Access

• 12151 = General Adaptation "Enabling"

Adaptation

Channel 016: Rear Wiper Comfort Function

• 0 = Rear Wiper not active with Front Wipers and Reverse Gear engaged
• 1 = Rear Wiper active with Front Wipers and Reverse Gear engaged

Basic Setting

Steering Column Adjustment

Prerequisites:

• Steering Column or the Central Electronics Control Module (J519) have been replaced.
• Approach all 4 end positions (up, down, forward, back).

[Select]
[09 - Central Electronics]
[Basic Settings - 04]
Group 001
[Go!]
Activate the Basic Setting.
[ON/OFF/Next]
The adjustment should now be learned.
[Done, Go Back]
[Close Controller, Go Back - 06]