B1487/038023
From Ross-Tech Wiki
Table Of Contents
-
1.
B1487/038023 - Motor for Window Regulator
-
1.1.1
B1487/038023 - Motor for Window Regulator: Missing Calibration / Basic Setting
- 1.1.1.2 Possible Symptoms
- 1.1.2.2 Possible Causes
- 1.1.3.2 Possible Solutions
- 1.1.4.2 Special Notes
-
1.1.1
B1487/038023 - Motor for Window Regulator: Missing Calibration / Basic Setting
B1487/038023 - Motor for Window Regulator
B1487/038023 - Motor for Window Regulator: Missing Calibration / Basic Setting
Possible Symptoms
- Window Automatic Run not working
- Pinch Protection limited
Possible Causes
- Automatic Run & Pinch Protection missing Basic Setting
Possible Solutions
- Perform Basic Settings Window Regulator Normalisation (see Special Notes)
Special Notes
- Window Regulator Normalisation'
- WARNING: The Basic Setting is performed below and there is a Risk of injury!
- The window will move during this procedure, make sure the window area is free and clear of people or objects.
- Use the Basic Settings Window Regulator Normalisation, press [Go!]
- Wait for the window to stop and the message Finished Correctly should be displayed.