Cruise Control Retrofitting (9N)

Requirements

Central Electronics Control Module

There are 3 Types of Central Electronic Control Modules (J519 / #09), only 2 of them support Cruise Control. The installed Type can easily be determined by the Control Module Part Number. Higher equipped Types always include the Options from the lower equipped ones.

• Basis
  • Part Numbers: 6Q2-937-049-***
• Medium
  • Part Numbers: 6Q1-937-049-***
  • Supported Features: Cruise Control System (CCS), Heated Front Window
• High
  • Part Numbers: 6Q0-937-049-***
  • Supported Features: Automatic Transmission (Shift Lock),

Engine Control Module

Some Engines were never available with Cruise Control from Factory but may still support the Configuration/Activation. The following List contains some of those Exceptions and if they support Cruise Control or not. Engines not listed here are assumed to support Cruise Control, exceptions may exist. ;-)

• 1.2l MPI AWY (47 kW / Simos 3PD)
  • Cruise Control NOT supported, will accept Activation though
• 1.2l MPI BBM (44 kW / Simos 9.1)
  • Cruise Control supported

Installation & Wiring

Please refer to Repair Manuals, Wiring Diagram, Parts Catalog and/or the Instructions included in the Retrofitting Kit for Details.

Configuration

The following Activations are necessary to ensure that the newly fitted parts are properly recognized and are ready to use.

• Update the Engine Control Module (J623 / #01) Login/Coding-2
  • Due to different Control Modules and Equipment in the Car the actual Login/Coding-2 Table is not shown here but will automatically be shown once you access the Function using VCDS.

If you are having trouble with the Configuration/Activation please Contact us directly. Make sure to include a complete Diagnostic Protocol (Auto-Scan) from the Car and state which steps/work you have performed yet.