VW Radio Navigation System (RNS510)
From Ross-Tech Wiki
Coding
Information for the latest RNS-510 units is available using the [Coding - 07] > Long Coding Helper found in VCDS .
Byte 00 | Radio Configuration I |
---|---|
Bit 1 | External CD Changer Connection active |
Bit 3 | Parking Aid Monitoring inactive (Standard) |
Byte 01 | Sound System Correction |
00 | Sound System not installed |
01 | Volkswagen Sound System |
02 | Skoda Sound System |
05 | Dynaudio Sound System |
Byte 02 | Speaker Channels |
00 | Sound System (active Speakers) |
02 | 2 Speaker Channels (Front only) |
04 | 4 Speaker Channels (Front and Rear) |
Byte 03 | Radio Configuration II |
Bit 1 | Microphone Diagnostics active (Japan/China only) |
Byte 04 | Treble Speaker Monitoring |
01 | Monitoring inactive |
02 | Front Monitoring active / Rear Monitoring inactive |
04 | Front and Rear Monitoring active |
Byte 05 | Vehicle Specific Frequency Response |
00 | Volkswagen/Skoda (all) |
01 | Seat Altea (5P) |
02 | Seat Leon (1P) |
03 | Seat Toledo (5P) |
04 | Seat Altea XL (5P) |
Byte 06 | Radio Configuration III |
00 | Standard/Not Relevant |
Byte 07 | Navigation System Configuration I |
Bit 0 | Multifunction Steering Wheel with Shortpress Buttons installed |
Bit 1 | Voice Control inactive (NOT Japan/China) |
Bit 2 | Speed Threshold for Destination Input active |
Bit 3 | Speed Threshold for Speech Destination Input active |
Bit 4+5 | Display Variant |
Byte 08 | Navigation System Configuration II |
00 | Standard/Not Relevant |
Adaptation
Channel 050: Development Test Mode
Activating Development Test Mode should enable "Hidden Menu" options however a reboot may be needed before any coding or adaptation modifications take effect.