View source for 18048/P1640/005696

__FORCETOC__
== 18048/P1640/005696 - Internal Control Module: EEPROM Error ==

==== Possible Causes ====

* Engine Control Module modified (e.g. Chip Tuning)
* Engine Control Module faulty

==== Possible Solutions ====

* Contact your Tuner ;)
* Replace Engine Control Module

==== Special Notes ====
* When found in CAN protocol 01-Engine controllers such as the (BHK) 3.6L Vr6 (4L) chassis Q7 with all zero coding try entering valid coding followed by a key cycle and Throttle Body Alignment. This control module allowed 005696 to be cleared after doing so:

 Address 01: Engine (BHK)       Labels: 03H-906-032-BLV.clb
    Part No SW: 03H 906 032 DA    HW: 03H 906 032 G
    Component: Q7 3.6-FSI-LEV2     3234

[[Category:Fault Codes]]