View source for 6-Speed Automatic Transmission (09G/09M/09K)

From Ross-Tech Wiki

← 6-Speed Automatic Transmission (09G/09M/09K)

You do not have permission to edit this page, for the following reason:

---

You can view and copy the source of this page.

__FORCETOC__ '''Information'''<br> The 09G, 09K and 09M transmissions are built on the same version of the 6-speed automatic transmission manufactured by Japanese automatic transmission manufacturer AISIN Co., LTD. <br> '''General Information''' about this Transmission is not yet available in the Wikipedia entry at this time. Additional information can be found in the [[Official Factory Repair Information]] and sources such as [http://www.bentleypublishers.com/volkswagen/technical-training/vw-6-speed-auto-trans-09g-09m-ssp.html Bentley Publisher's SSP (Self-Study Program)] .<br> == Coding == Due to all of the Coding variants for the 09G transmission it is recommended to use the coding from the original module when replacing the TCM. VCDS will display a coding chart a pop-up balloon while connected to the vehicle. == Basic Setting == === Kick-Down Adjustment === '''<u>Prerequisites:</u>'''<br> * No fault codes in the Auto Trans.<br> * [[Throttle Body Alignment (TBA)]] performed successfully ''when applicable''<br> * Ignition on, engine off.<br> * Do not touch the accelerator pedal.<br> '''[Select]'''<br> '''[02 - Auto Trans]'''<br> '''[Basic Settings - 04]'''<br> Set Group to "001" <br> '''[Go!]'''<br> Do not touch the accelerator pedal.<br> ''System in Grundeinstellung will be displayed''<br> '''[Done, Go Back]'''<br> === Special Notes === * It is normal for there to be no explicit instructions or changes on the screen when you do the above procedure other than "System in Grundeinstellung". * If faults are stored in the Engine or Transmission for throttle related problems, the procedure will not be successful. * The 09G transmission is commonly found in vehicles using the Drive-by-Wire (DBW) throttle systems. In most cases the ECM (Engine Control Module) should support a Kick-Down Basic Settings as described here: [[Automatic Transmission Basic Settings#Kick-Down_Basic_Settings_in_ECM | Automatic Transmission Basic Settings]]. <br> [[Category:Transmissions]]

Return to 6-Speed Automatic Transmission (09G/09M/09K).