View source for Audi A6 (4B) Level Control (4-Wheel)

From Ross-Tech Wiki

← Audi A6 (4B) Level Control (4-Wheel)

You do not have permission to edit this page, for the following reason:

---

You can view and copy the source of this page.

== Coding == * 25500 = Standard == Security Access == == Adaptation == == Basic Setting == The Basic Setting function is not supported by this module, == Special Procedures == === Suspension Level Control Calibration === '''Prerequisites''' * Engine at idle * Transmission in park/neutral * Doors, hood, rear lid or hatch are to remain shut during the entire procedure '''[Select]'''<br> '''[34 - Level Control]'''<br> '''[Login - 11]'''<br> * Enter 31564 '''[Do It!]'''<br> '''[Adaption - 10]'''<br> * Channel 01 '''[Read]'''<br> The vehicle will now try to level itself. The first field will show "Wait". Once this process is complete, the first field will show "Value".<br> Now measure the ride height, in millimeters, from the center of the wheel to the edge of fender, do this for all four wheels and record the values.<br> https://www.ross-tech.com/vag-com/cars/images/rim.jpeg <br> In the "New Value" field for '''channel 01''', input the measurement from the '''left front''' wheel.<br> '''[Test]''' - '''[Save]''' - Confirm '''[Yes]'''<br> Click the '''[Up]''' button to go to Channel 02.<br> In the "New Value" field for '''channel 02''', input the measurement from the '''right front''' wheel.<br> '''[Test]''' - '''[Save]''' - Confirm '''[Yes]'''<br> Click the '''[Up]''' button to go to Channel 03.<br> In the "New Value" field for '''channel 03''', input the measurement from the '''left rear wheel'''.<br> '''[Test]''' - '''[Save]''' - Confirm '''[Yes]'''<br> Click the '''[Up]''' button to go to Channel 04.<br> In the "New Value" field for '''channel 04''', input the measurement from the '''right rear wheel'''.<br> '''[Test]''' - '''[Save]''' - Confirm '''[Yes]'''<br> Click the '''[Up]''' button to go to Channel 05.<br> In the "New Value" field for '''channel 05''', input a value of '''1'''.<br> '''[Test]''' - '''[Save]''' - Confirm '''[Yes]'''<br> '''[Done, Go Back]'''<br> Check for fault codes, if all procedures went fine there should be none.<br> === Video Link === Suspension Leveling Calibration [[File:Thumbnail.jpg|200px|link=http://www.youtube.com/watch?v=o2aeQ6bhu-Y]] http://www.youtube.com/watch?v=o2aeQ6bhu-Y

Return to Audi A6 (4B) Level Control (4-Wheel).