View source for P246E

From Ross-Tech Wiki

← P246E

You do not have permission to edit this page, for the following reason:

---

You can view and copy the source of this page.

__FORCETOC__ == P246E Exhaust Gas Temperature Sensor 4 Bank 1: Electrical Malfunction == ==== Possible Symptoms ==== * Power Loss/Limp mode * MIL on * Glow Plug Light on * DPF Light on ==== Possible Causes ==== * EGT sensor faulty * EGT wiring faulty ==== Possible Solutions ==== * Check EGT sensor and wiring. * Note, when found in RoW B8 chassis A4 (8K) models with Engine code CAGA which uses the UDS protocol: ** The Advanced Measuring Values for EGT sensors may not be labeled correctly! Make sure to check [*'''ENG106430'''*] ''Exhaust gas temperature before particulate filter'' even though this is the last (4th) sensor. ** Unplugging the suspect EGT sensor while re-checking the resulting fault codes and evaluating Advanced Measuring Values would be advised before replacing parts. [[Category:Fault Codes]]

Return to P246E.