View source for Suspension Level Control Calibration (non-UDS)

''Note that these instructions are only for non-UDS Level Control systems.  [http://forums.ross-tech.com/showthread.php?1905-UDS-Vs-non-UDS Click here to learn about UDS vs non-UDS control modules.]''

'''<u>Prerequisites:</u>'''<br>
*Doors, hood and rear lid closed
*Engine at idle, parking brake set
*Parked on level surface
*Metric tape measure

Measuring the ride height is done from the center of the wheel, vertically, to the edge of the fender to the closest millimeter.<br>
[[File:Rim level control.jpg|300px]]<br>


'''[Select]'''<br>
'''[34 - Level Control]'''<br>
'''[Security Access - 16]'''<br>
Enter 31564<br>
'''[Do It!]'''<br>
* If the Security Access code does not work, try 31564 in '''[Login - 11]''' or '''[Coding II - 11]'''

'''[Adaption - 10]'''<br>

Channel 01 (front left)<br>
'''[Read]'''<br>
*A message of "Wait" will be displayed while the right height is adjusted.
*When message changes to "Value", take the measurement at front left.
*Input the New value in millimeters. 
'''[Test]'''<br>
'''[Save]'''<br>
'''[Yes]'''<br>

Channel 02 (front right)<br>
'''[Read]'''<br>
*Take measurement at right front.
*Input the New value in millimeters.
'''[Test]'''<br>
'''[Save]'''<br>
'''[Yes]'''<br>

Channel 03 (rear left)<br>
'''[Read]'''<br>
*Take measurement at left rear.
*Input the New value in millimeters.
'''[Test]'''<br>
'''[Save]'''<br>
'''[Yes]'''<br>

Channel 04 (rear right)<br>
'''[Read]'''<br>
*Take measurement at right rear.
*Input the New value in millimeters.
'''[Test]'''<br>
'''[Save]'''<br>
'''[Yes]'''<br>

Channel 05<br>
'''[Read]'''<br>
New value 1<br>
'''[Test]'''<br>
'''[Save]'''<br>
'''[Yes]'''<br>
'''[Done, Go Back] '''<br>


== Special Notes ==
----

*These instructions should work with most non-USD Level Control systems found in:
**A6
**A8
**Q7
**Phaeton
**Touareg
**Bentley Continental.

*Additional links on this topic
**http://www.ross-tech.com/vag-com/cars/levelcontrol.html
**http://forums.vwvortex.com/showthread.php?2055204

== Video Link ==
----
=== Suspension Leveling Calibration ===

[[File:Thumbnail.jpg|200px|link=http://www.youtube.com/watch?v=o2aeQ6bhu-Y]]

http://www.youtube.com/watch?v=o2aeQ6bhu-Y