View source for VW Touareg (7L) Heating/Air Conditioning

From Ross-Tech Wiki

← VW Touareg (7L) Heating/Air Conditioning

You do not have permission to edit this page, for the following reason:

---

You can view and copy the source of this page.

__FORCETOC__ == Coding == * '''00xxx?0''': ''Glass Type'' ** 2 = Standard Glass (Clear Glass) ** 3 = Thermal Protection Glass (Insulated/Acoustic Glass) * '''00xx?x0''': ''Roof'' ** 0 = Solar Roof not installed & Anti-Whistle Measures inactive ** 1 = Anti-Whistle Measures active (only older Climate Control Units) ** 2 = Solar Roof installed ** 3 = Solar Roof not installed & Anti-Whistle Measures active (4-Zone Climatronic) ** 4 = Solar Roof installed & Anti-Whistle Measures active (4-Zone Climatronic) ** 5 = Solar Roof not installed & Anti-Whistle Measures inactive & Without Acoustic Package ** 6 = Anti-Whistle Measures active (only older Climate Control Units) & Without Acoustic Package ** 7 = Solar Roof installed & Without Acoustic Package ** 8 = Solar Roof not installed & Anti-Whistle Measures active (4-Zone Climatronic) & Without Acoustic Package ** 9 = Solar Roof installed & Anti-Whistle Measures active (4-Zone Climatronic) & Without Acoustic Package * '''00x?xx0''': ''Refrigerant Loss Recognition'' ** 0 = Refrigerant Temperature Sensor installed ''(Recognition activated)'' ** 1 = Refrigerant Temperature Sensor not installed ''(Recognition deactivated)'' ** 2 = Refrigerant Temperature Sensor installed ''(Recognition activated / V6 FSI Engine)'' * '''00?xxx0''': ''Options'' ** +1 = Climate Control Activation Delay (140 ms) active ** +2 = Anti-Fog Measures active (Hot Country/"Florida" Coding) == Basic Setting == === Normal (Potentiometer & Flap Adaptation) === '''<u>Prerequisites:</u>'''<br> * Potentiometer / Flap replyed * OR Climatronic Control Module (J255) replaced * OR Climatronic Control Module (J255) recoded '''[Select]'''<br> '''[08 - Heating/Air Conditioning]'''<br> '''[Basic Settings - 04]'''<br> Group 001<br> '''[Go!]'''<br> Activate the Basic Setting.<br> '''[ON/OFF/Next]'''<br> The basic setting takes approximately 25 seconds.<br> '''[Done, Go Back]'''<br> '''[Close Controller, Go Back - 06]'''<br> === Service Position === '''<u>Notes:</u>'''<br> * Has to be performed before ANY Actuators/Motors are being removed. * While in Service Position the Display reads SF ''(German for "Servicefall")''. * Make sure to have the Ignition OFF while working on the Actuators/Motors. * Once all work has been done, switch ON the Ignition and perform the normal Basic Setting (Potentiometer & Flap Adaptation). '''[Select]'''<br> '''[08 - Heating/Air Conditioning]'''<br> '''[Basic Settings - 04]'''<br> Group 002<br> '''[Go!]'''<br> Activate the Basic Setting.<br> '''[ON/OFF/Next]'''<br> The Display should read '''SF'''now.<br> '''[Done, Go Back]'''<br> '''[Close Controller, Go Back - 06]'''<br>

Return to VW Touareg (7L) Heating/Air Conditioning.