00810: Difference between revisions

Latest revision as of 21:05, 6 June 2008

Perform Sensor 1/2 for Brake Pressure Basic Setting
- See Vehicle specific Diagnostic Procedures for Details

In cases where the Sensor for Brake Pressure is part of the Brake Hydraulics Unit, the complete Unit may need to be replaced.

@@ Line 10: / Line 10: @@
 ==== Possible Causes ====
-* Basic Setting not performed
+* Sensor 1/2 for Brake Pressure Basic Setting lost/not performed
 ==== Possible Solutions ====
-* Perform Basic Setting
+* Perform Sensor 1/2 for Brake Pressure Basic Setting
+** See Vehicle specific [[Diagnostic Procedures]] for Details
+=== 00810 - Sensor 1/2 for Brake Pressure: Implausible Signal ===
+==== Possible Symptoms ====
+* Malfunction Indicator Light (MIL) active
+==== Possible Causes ====
+* Sensor 1/2 for Brake Pressure faulty
+==== Possible Solutions ====
+* Check/Replace Sensor 1/2 for Brake Pressure
+==== Special Notes ====
+* In cases where the Sensor for Brake Pressure is part of the Brake Hydraulics Unit, the complete Unit may need to be replaced.
+[[Category:Fault Codes]]