01542: Difference between revisions

Latest revision as of 02:24, 14 November 2010

Perform Yaw Rate Sensor (G202) Basic Setting
- See Vehicle specific Diagnostic Procedures for Details

@@ Line 6: / Line 6: @@
 ==== Possible Symptoms ====
-* Malfunction Indicator Light (MIL) active
+* Malfunction Indicator Light (MIL) ON
 ==== Possible Causes ====
+* Wiring and/or Connector(s) from/to Yaw Rate Sensor (G202) faulty
 * Yaw Rate Sensor (G202) faulty
 * ESP-Sensor Unit (G419) faulty
@@ Line 15: / Line 16: @@
 ==== Possible Solutions ====
+* Check Wiring and/or Connector(s) from/to Yaw Rate Sensor (G202)
 * Check Yaw Rate Sensor (G202)
+** Check Measuring Value Block (MVB)
 * Check ESP-Sensor Unit (G419)
+=== 01542 - Yaw Rate Sensor (G202): Implausible Signal ===
+==== Possible Symptoms ====
+* Malfunction Indicator Light (MIL) ON
+==== Possible Causes ====
+* Ground Wiring and/or Connector(s) from/to Yaw Rate Sensor (G202) faulty
+* Installation Position of Yaw Rate Sensor (G202) incorrect
+* Yaw Rate Sensor (G202) faulty
+* ESP-Sensor Unit (G419) faulty
+==== Possible Solutions ====
+* Check Wiring and/or Connector(s) from/to Yaw Rate Sensor (G202)
+* Check Installation Position of Yaw Rate Sensor (G202)
+* Check Yaw Rate Sensor (G202)
+** Check Measuring Value Block (MVB)
+* Check ESP-Sensor Unit (G419)
+=== 01542 - Yaw Rate Sensor (G202): No or Incorrect Basic Setting / Adaptation ===
+==== Possible Causes ====
+* Yaw Rate Sensor (G202) Basic Setting lost/not performed
+==== Possible Solutions ====
+* Perform Yaw Rate Sensor (G202) Basic Setting
+** See Vehicle specific [[Diagnostic Procedures]] for Details
+__FORCETOC__
 [[Category:Fault Codes]]