Difference between revisions of "Immobilizer II ECU Swapping"
From Ross-Tech Wiki
| Line 14: | Line 14: | ||
'''[Read]'''<br> | '''[Read]'''<br> | ||
'''[Save]'''<br> | '''[Save]'''<br> | ||
| − | |||
'''[Done, Go Back]'''<br> | '''[Done, Go Back]'''<br> | ||
'''[Close Controller, Go Back - 06]'''<br> | '''[Close Controller, Go Back - 06]'''<br> | ||
'''[Exit]'''<br> | '''[Exit]'''<br> | ||
| − | + | Turn ignition OFF for 15 seconds. Start vehicle.<br> | |
| − | Turn ignition OFF for 15 seconds. Start vehicle. | + | |
| − | <br> | ||
| − | |||
Notes: | Notes: | ||
| + | * For cars with a separate Immobilizer (Includes 2000+ EuroVan, Cabrio, and many older non-US models), use '''[25 Immobilizer]''' instead of '''[17 - Instruments]'''. The rest of the procedure is the same. | ||
| + | |||
| + | * On some Euro Audi models with Immobilizer 2, the PIN/SKC will be required. | ||
| − | + | == Activating Cruise Control on a new ECU (DBW) == | |
| + | DBW (''Drive-by-Wire'') Factory fresh ECU's often come with cruise control de-activated.<br> | ||
| − | + | '''[Select]'''<br> | |
| + | '''[01 - Engine]'''<br> | ||
| + | '''[Login - 11]'''<br> | ||
| + | Enter 11463 to activate cruise control<br> | ||
| + | '''[Do It!]'''<br> | ||
Revision as of 17:02, 18 March 2011
Ross-Tech is not responsible for any damage or problems that may result from following these instructions. They are to be used at your own risk. As always, you should refer to a Factory Repair Manual for your vehicle!
ECM Matching
Prerequisites:
- Battery voltage at least 12.5 V.
- Immobilizer II ECM
[Select]
[17 - Instruments]
[Adaption - 10]
Leave channel at "00"
[Read]
[Save]
[Done, Go Back]
[Close Controller, Go Back - 06]
[Exit]
Turn ignition OFF for 15 seconds. Start vehicle.
Notes:
- For cars with a separate Immobilizer (Includes 2000+ EuroVan, Cabrio, and many older non-US models), use [25 Immobilizer] instead of [17 - Instruments]. The rest of the procedure is the same.
- On some Euro Audi models with Immobilizer 2, the PIN/SKC will be required.
Activating Cruise Control on a new ECU (DBW)
DBW (Drive-by-Wire) Factory fresh ECU's often come with cruise control de-activated.
[Select]
[01 - Engine]
[Login - 11]
Enter 11463 to activate cruise control
[Do It!]