Difference between revisions of "02844"

From Ross-Tech Wiki
m
Line 19: Line 19:
 
* Check Control Module Coding
 
* Check Control Module Coding
 
* Check Wiring/Connectors from/to Brake Light Switch (F)
 
* Check Wiring/Connectors from/to Brake Light Switch (F)
* Check Wiring/Connectors from/to Lamp for Auto-Hold (K237)
+
* Check Wiring/Connectors and fuse(s) from/to Lamp for Auto-Hold (K237)
  
 
==== Special Notes ====
 
==== Special Notes ====

Revision as of 09:41, 8 September 2011

02844 - Lamp for Automatic Parking Function

02844 - Lamp for Automatic Parking Function: Open or Short to Ground

Possible Symptoms

  • Malfunction Indicator Light (MIL) active

Possible Causes

  • Control Module incorrectly coded, Auto-Hold not installed
  • Wiring/Connectors from/to Brake Light Switch (F) faulty
  • Wiring/Connectors from/to Lamp for Auto-Hold (K237) faulty

Possible Solutions

  • Perform Output Test
  • Check Control Module Coding
  • Check Wiring/Connectors from/to Brake Light Switch (F)
  • Check Wiring/Connectors and fuse(s) from/to Lamp for Auto-Hold (K237)

Special Notes

  • When found in VW Passat (3C): Parking Brake
    • Check if Auto-Hold is installed, car data plate (sticker on 1st page of the service manual or identical sticker in the trunk) should have a UH2 tag.
    • Check Brake Light Switch (F) Signal via Parking Brake Control Module Measuring Value Block (MVB) 003.1
    • Perform Selective Output Test (in Parking Brake Control Module)