29709/U1013/053267: Difference between revisions
From Ross-Tech Wiki
Table Of Contents
-
1.
29709/U1013/053267 - Control Module Not Coded
- 1.1.1 Possible Symptoms
- 1.2.1 Possible Causes
- 1.3.1 Possible Solutions
- 1.4.1 Special Notes
RtWiKiSyS0p (talk | contribs) No edit summary |
No edit summary |
||
| Line 16: | Line 16: | ||
==== Special Notes ==== | ==== Special Notes ==== | ||
* In certain cases this code may be stored even after properly coding a module (e.g. VW RNS510 or 9W7). In such cases make sure to use a proper workshop code (WSC), importer and device number. | * In certain cases this code may be stored even after properly coding a module (e.g. VW RNS510 or 9W7). In such cases make sure to use a proper workshop code (WSC), importer and device number. Entering defaults such as 12345/123/12345 in the boxes beneath the [http://www.ross-tech.com/vcds/tour/recode_screen.html#long New coding] followed by recoding the module to the same value should resolve those issues: | ||
[[Category:Fault Codes]] | [[Category:Fault Codes]] | ||
Latest revision as of 16:00, 25 January 2012
29709/U1013/053267 - Control Module Not Coded
Possible Symptoms
- Malfunction Indicator Light (MIL) active
Possible Causes
- Control Module not coded
Possible Solutions
- Check Control Module Coding
Special Notes
- In certain cases this code may be stored even after properly coding a module (e.g. VW RNS510 or 9W7). In such cases make sure to use a proper workshop code (WSC), importer and device number. Entering defaults such as 12345/123/12345 in the boxes beneath the New coding followed by recoding the module to the same value should resolve those issues: