Difference between revisions of "18047/P1639/005689"
From Ross-Tech Wiki
| (3 intermediate revisions by 2 users not shown) | |||
| Line 1: | Line 1: | ||
| − | == 18047/P1639 - Accelerator Position Sensor 1/2 (G79/G185): Implausible Signal == | + | == 18047/P1639/005689 - Accelerator Position Sensor 1/2 (G79/G185): Implausible Signal == |
==== Possible Symptoms ==== | ==== Possible Symptoms ==== | ||
| Line 16: | Line 16: | ||
* Check Measuring Block Readings for Accelerator Pedal | * Check Measuring Block Readings for Accelerator Pedal | ||
* Check Voltage Signals from ECM to Throttle Pedal (see factory repair manual) | * Check Voltage Signals from ECM to Throttle Pedal (see factory repair manual) | ||
| − | * Check Wiring and Connectors from Accelerator Pedal | + | * Check Wiring and Connectors from ECM to Accelerator Pedal |
==== Special Notes ==== | ==== Special Notes ==== | ||
| − | * There are 2 sensors in the accelerator pedal, both | + | * There are 2 sensors in the accelerator pedal, both should increase in the same direction as the accelerator is pressed but they have different scales. This means one counts from 0 to 100, while the other one counts from 0 to 50. |
* Accelerator Position Sensor faults can be caused by issues with the Oxygen Sensor(s) and it's wiring. Please verify this '''BEFORE''' replacing the ECM or Accelerator Pedal. Accelerator Pedal failure is very rare. | * Accelerator Position Sensor faults can be caused by issues with the Oxygen Sensor(s) and it's wiring. Please verify this '''BEFORE''' replacing the ECM or Accelerator Pedal. Accelerator Pedal failure is very rare. | ||
Latest revision as of 11:45, 16 February 2012
18047/P1639/005689 - Accelerator Position Sensor 1/2 (G79/G185): Implausible Signal
Possible Symptoms
- Malfunction Indicator Light (MIL) ON
- Reduced Engine Output
Possible Causes
- Wiring and/or connections faulty
- Faulty ECM
- Faulty Accelerator Pedal
Possible Solutions
- Check Measuring Block Readings for Accelerator Pedal
- Check Voltage Signals from ECM to Throttle Pedal (see factory repair manual)
- Check Wiring and Connectors from ECM to Accelerator Pedal
Special Notes
- There are 2 sensors in the accelerator pedal, both should increase in the same direction as the accelerator is pressed but they have different scales. This means one counts from 0 to 100, while the other one counts from 0 to 50.
- Accelerator Position Sensor faults can be caused by issues with the Oxygen Sensor(s) and it's wiring. Please verify this BEFORE replacing the ECM or Accelerator Pedal. Accelerator Pedal failure is very rare.