Difference between revisions of "VW Touareg (7L) Trunk Electronics"
From Ross-Tech Wiki
| Line 1: | Line 1: | ||
__FORCETOC__ | __FORCETOC__ | ||
| − | This page applies to | + | This page applies to Address-6D: Trunk Elect.in the VW Touareg (7L6) with Component: J605 HECKKLAPPE. This can be identified by evaluating the data in the Auto-Scan: |
| − | Address 6D: Trunk Elect. | + | Address 6D: Trunk Elect. Labels: None |
| − | Part No SW: | + | Part No SW: 7L6 959 107 B HW: 7L6 959 107 B |
| − | Component: ''' | + | Component: '''J605 HECKKLAPPE''' 1310 |
| − | |||
== Security Access == | == Security Access == | ||
| Line 12: | Line 11: | ||
== Coding == | == Coding == | ||
| − | * | + | * This control module is Short coded. |
* When replacing this module save the original coding and transfer it to the new module.<br> | * When replacing this module save the original coding and transfer it to the new module.<br> | ||
| Line 19: | Line 18: | ||
'''[Select]'''<br> | '''[Select]'''<br> | ||
| − | ''' [6D-Trunk Elect.] | + | ''' [6D-Trunk Elect.]<br> |
| − | |||
''' [Security Access - 16]<br> | ''' [Security Access - 16]<br> | ||
| − | Enter | + | Enter 59107<br> |
| − | + | '''[Do it!]'''<br> | |
| − | |||
| − | |||
'''[Basic Settings - 04]'''<br> | '''[Basic Settings - 04]'''<br> | ||
Group 001<br> | Group 001<br> | ||
| Line 38: | Line 34: | ||
* Check for proper operation | * Check for proper operation | ||
* Re-check for faults | * Re-check for faults | ||
| + | |||
| + | |||
| + | Internal use references: ST?ID=59047 -and- ST?ID=37245 | ||
Revision as of 17:23, 7 March 2016
This page applies to Address-6D: Trunk Elect.in the VW Touareg (7L6) with Component: J605 HECKKLAPPE. This can be identified by evaluating the data in the Auto-Scan:
Address 6D: Trunk Elect. Labels: None Part No SW: 7L6 959 107 B HW: 7L6 959 107 B Component: J605 HECKKLAPPE 1310
Security Access
- Security Access codes will appear when connected to the control module with VCDS.
Coding
- This control module is Short coded.
- When replacing this module save the original coding and transfer it to the new module.
Basic Setting
Rear Lid relearn
[Select]
[6D-Trunk Elect.]
[Security Access - 16]
Enter 59107
[Do it!]
[Basic Settings - 04]
Group 001
[Go!]
[Done, Go Back]
The rear lid Basic Settings will now begin and the rear lid will now open.
- When the rear lid has stopped, close the rear lid.
- Check for fault codes, clear if needed.
[Close Controller, Go Back - 06]
- Check for proper operation
- Re-check for faults
Internal use references: ST?ID=59047 -and- ST?ID=37245