Difference between revisions of "VW Touareg (7L) Trunk Electronics"
(2 intermediate revisions by the same user not shown) | |||
Line 16: | Line 16: | ||
== Basic Setting == | == Basic Setting == | ||
=== Rear Lid relearn === | === Rear Lid relearn === | ||
+ | '''<u>Prerequisites:</u>'''<br> | ||
+ | * Rear Lid closed | ||
+ | * No rear lid obstructions or damage to the vehicle | ||
+ | * Battery voltage at least 12.0V | ||
+ | * Vehicle is on a flat level surface | ||
'''[Select]'''<br> | '''[Select]'''<br> | ||
Line 25: | Line 30: | ||
Group 001<br> | Group 001<br> | ||
'''[Go!]'''<br> | '''[Go!]'''<br> | ||
+ | The rear lid Basic Settings will now begin and the rear lid will now open. If the lid does not open use the '''[On/Off/Next]''' button.<br> | ||
'''[Done, Go Back]'''<br> | '''[Done, Go Back]'''<br> | ||
− | |||
− | |||
*When the rear lid has stopped, close the rear lid. | *When the rear lid has stopped, close the rear lid. | ||
*Check for fault codes, clear if needed. | *Check for fault codes, clear if needed. | ||
Line 34: | Line 38: | ||
* Check for proper operation | * Check for proper operation | ||
* Re-check for faults | * Re-check for faults | ||
+ | |||
+ | == Special Notes == | ||
+ | NAR and RoW market TPIs exist for rear lid concerns with 6D part number modules when the rear lid is limited to 1/3 travel (31°): | ||
+ | * 7L6 959 107 (all software levels) | ||
+ | * 7L6 959 107 A (software level 1210) | ||
+ | ** RoW market TPI 2017458 | ||
+ | ** NAR market TPI 2018695 | ||
+ | After the flash update is completed address 6D should show part number 7L6 959 107 B @ software level: 1310 | ||
+ | |||
+ | |||
Internal use references: ST?ID=59047 -and- ST?ID=37245 | Internal use references: ST?ID=59047 -and- ST?ID=37245 |
Latest revision as of 09:42, 6 June 2017
This page applies to Address-6D: Trunk Elect.in the VW Touareg (7L6) with Component: J605 HECKKLAPPE. This can be identified by evaluating the data in the Auto-Scan:
Address 6D: Trunk Elect. Labels: None Part No SW: 7L6 959 107 B HW: 7L6 959 107 B Component: J605 HECKKLAPPE 1310
Security Access
- Security Access codes will appear when connected to the control module with VCDS.
Coding
- This control module is Short coded.
- When replacing this module save the original coding and transfer it to the new module.
Basic Setting
Rear Lid relearn
Prerequisites:
- Rear Lid closed
- No rear lid obstructions or damage to the vehicle
- Battery voltage at least 12.0V
- Vehicle is on a flat level surface
[Select]
[6D-Trunk Elect.]
[Security Access - 16]
Enter 59107
[Do it!]
[Basic Settings - 04]
Group 001
[Go!]
The rear lid Basic Settings will now begin and the rear lid will now open. If the lid does not open use the [On/Off/Next] button.
[Done, Go Back]
- When the rear lid has stopped, close the rear lid.
- Check for fault codes, clear if needed.
[Close Controller, Go Back - 06]
- Check for proper operation
- Re-check for faults
Special Notes
NAR and RoW market TPIs exist for rear lid concerns with 6D part number modules when the rear lid is limited to 1/3 travel (31°):
- 7L6 959 107 (all software levels)
- 7L6 959 107 A (software level 1210)
- RoW market TPI 2017458
- NAR market TPI 2018695
After the flash update is completed address 6D should show part number 7L6 959 107 B @ software level: 1310
Internal use references: ST?ID=59047 -and- ST?ID=37245