VW Golf (1K) Brake Electronics (MK70): Difference between revisions
From Ross-Tech Wiki
Table Of Contents
-
1.
Coding
- 1.1.1 ABS (MK70)
- 2. Basic Setting
RtWiKiSyS0p (talk | contribs) mNo edit summary |
|||
| (7 intermediate revisions by 2 users not shown) | |||
| Line 4: | Line 4: | ||
=== ABS (MK70) === | === ABS (MK70) === | ||
*'''Model''': | |||
**+0000001 = Audi A3 (8P) / Seat Altea (5P) / Seat Leon (1P) / VW Golf/Jetta (1K) / Skoda Octavia (1Z) | |||
**+0000065 = VW Touran (1T) | |||
**+0000082 = VW Caddy (2K) | |||
**+0000097 = VW Eos (1F) | |||
*'''Suspension''': | |||
**+0000640 = Standard Suspension | |||
*'''Tire Pressure Monitoring (TPMS)''': | *'''Tire Pressure Monitoring (TPMS)''': | ||
**+0000000 = with Tire Pressure Monitoring ''(PR-7K1/7K6)'' | **+0000000 = with ABS based Tire Pressure Monitoring ''(PR-7K1/7K6)'' | ||
**+0016384 = without Tire Pressure Monitoring ''(PR-7K0)'' | **+0016384 = without ABS based Tire Pressure Monitoring ''(PR-7K0/7K4/7K8)'' | ||
'''''Notes''': See production codes on car data plate. Coding is the sum of the individual options.'' | '''''Notes''': See production codes on car data plate. Coding is the sum of the individual options.'' | ||
== Basic Setting == | == Basic Setting == | ||
| Line 15: | Line 21: | ||
=== Sensor for Steering Angle (G85) === | === Sensor for Steering Angle (G85) === | ||
''For Continental/Teves Brake Electronics MK70, the basic setting needs to be carried out in the [[VW Golf (1K) Steering Assist#Basic Setting|Steering Assist | ''For Continental/Teves Brake Electronics MK70, the basic setting needs to be carried out in the [[VW Golf (1K) Steering Assist#Basic Setting|Steering Assist]] control module.'' | ||
=== Tire Pressure Monitoring System Reset === | |||
'''<u>Prerequisites:</u>'''<br> | |||
* Ignition ON<br><br> | |||
'''[Select]'''<br> | |||
'''[03 - Brake Electronics]'''<br> | |||
'''[Basic Settings - 04]'''<br> | |||
Group 042<br> | |||
'''[Go!]'''<br> | |||
Activate the Basic Setting.<br> | |||
'''[ON/OFF/Next]'''<br> | |||
'''[Done, Go Back]'''<br> | |||
'''[Close Controller, Go Back - 06]'''<br><br> | |||
* The Tire Pressure Monitoring Lamp (K220) should blink. | |||
* Now check the Tire Pressure and correct it if necessary. | |||
* Press and Hold the Tire Pressure Monitoring Button (E492) '''AND''' the ASR/ESP Button (E256) for 2 Seconds. | |||
* A short Tone should sound after pressing/holding these buttons for 2 Seconds and the blinking should change to a permanent lit Tire Pressure Monitoring Lamp (K220). | |||
* The Reset is now done and as soon as you let the buttons go the Tire Pressure Monitoring Lamp (K220) should go OFF. | |||
Latest revision as of 16:45, 11 May 2018
Coding
ABS (MK70)
- Model:
- +0000001 = Audi A3 (8P) / Seat Altea (5P) / Seat Leon (1P) / VW Golf/Jetta (1K) / Skoda Octavia (1Z)
- +0000065 = VW Touran (1T)
- +0000082 = VW Caddy (2K)
- +0000097 = VW Eos (1F)
- Suspension:
- +0000640 = Standard Suspension
- Tire Pressure Monitoring (TPMS):
- +0000000 = with ABS based Tire Pressure Monitoring (PR-7K1/7K6)
- +0016384 = without ABS based Tire Pressure Monitoring (PR-7K0/7K4/7K8)
Notes: See production codes on car data plate. Coding is the sum of the individual options.
Basic Setting
Sensor for Steering Angle (G85)
For Continental/Teves Brake Electronics MK70, the basic setting needs to be carried out in the Steering Assist control module.
Tire Pressure Monitoring System Reset
Prerequisites:
- Ignition ON
[Select]
[03 - Brake Electronics]
[Basic Settings - 04]
Group 042
[Go!]
Activate the Basic Setting.
[ON/OFF/Next]
[Done, Go Back]
[Close Controller, Go Back - 06]
- The Tire Pressure Monitoring Lamp (K220) should blink.
- Now check the Tire Pressure and correct it if necessary.
- Press and Hold the Tire Pressure Monitoring Button (E492) AND the ASR/ESP Button (E256) for 2 Seconds.
- A short Tone should sound after pressing/holding these buttons for 2 Seconds and the blinking should change to a permanent lit Tire Pressure Monitoring Lamp (K220).
- The Reset is now done and as soon as you let the buttons go the Tire Pressure Monitoring Lamp (K220) should go OFF.
No categories.