Difference between revisions of "VW Golf (1K) Brake Electronics (MK70)"

From Ross-Tech Wiki
m
 
(4 intermediate revisions by 2 users not shown)
Line 5: Line 5:
  
 
*'''Model''':
 
*'''Model''':
−
**+0000001 = Audi A3 (8P) / Seat Leon (1P) / VW Golf/Jetta (1K)
+
**+0000001 = Audi A3 (8P) / Seat Altea (5P) / Seat Leon (1P) / VW Golf/Jetta (1K) / Skoda Octavia (1Z)
 
**+0000065 = VW Touran (1T)
 
**+0000065 = VW Touran (1T)
 
**+0000082 = VW Caddy (2K)
 
**+0000082 = VW Caddy (2K)
Line 12: Line 12:
 
**+0000640 = Standard Suspension
 
**+0000640 = Standard Suspension
 
*'''Tire Pressure Monitoring (TPMS)''':
 
*'''Tire Pressure Monitoring (TPMS)''':
−
**+0000000 = with Tire Pressure Monitoring ''(PR-7K1/7K6)''
+
**+0000000 = with ABS based Tire Pressure Monitoring ''(PR-7K1/7K6)''
−
**+0016384 = without Tire Pressure Monitoring ''(PR-7K0)''
+
**+0016384 = without ABS based Tire Pressure Monitoring ''(PR-7K0/7K4/7K8)''
  
 
'''''Notes''': See production codes on car data plate. Coding is the sum of the individual options.''
 
'''''Notes''': See production codes on car data plate. Coding is the sum of the individual options.''
−
 
  
 
== Basic Setting ==
 
== Basic Setting ==
Line 23: Line 22:
  
 
''For Continental/Teves Brake Electronics MK70, the basic setting needs to be carried out in the [[VW Golf (1K) Steering Assist#Basic Setting|Steering Assist]] control module.''
 
''For Continental/Teves Brake Electronics MK70, the basic setting needs to be carried out in the [[VW Golf (1K) Steering Assist#Basic Setting|Steering Assist]] control module.''
 +
 +
 +
=== Tire Pressure Monitoring System Reset ===
 +
 +
'''<u>Prerequisites:</u>'''<br>
 +
* Ignition ON<br><br>
 +
 +
'''[Select]'''<br>
 +
'''[03 - Brake Electronics]'''<br>
 +
'''[Basic Settings - 04]'''<br>
 +
Group 042<br>
 +
'''[Go!]'''<br>
 +
Activate the Basic Setting.<br>
 +
'''[ON/OFF/Next]'''<br>
 +
'''[Done, Go Back]'''<br>
 +
'''[Close Controller, Go Back - 06]'''<br><br>
 +
* The Tire Pressure Monitoring Lamp (K220) should blink.
 +
* Now check the Tire Pressure and correct it if necessary.
 +
* Press and Hold the Tire Pressure Monitoring Button (E492) '''AND''' the ASR/ESP Button (E256) for 2 Seconds.
 +
* A short Tone should sound after pressing/holding these buttons for 2 Seconds and the blinking should change to a permanent lit Tire Pressure Monitoring Lamp (K220).
 +
* The Reset is now done and as soon as you let the buttons go the Tire Pressure Monitoring Lamp (K220) should go OFF.

Latest revision as of 11:45, 11 May 2018

Coding

ABS (MK70)

  • Model:
    • +0000001 = Audi A3 (8P) / Seat Altea (5P) / Seat Leon (1P) / VW Golf/Jetta (1K) / Skoda Octavia (1Z)
    • +0000065 = VW Touran (1T)
    • +0000082 = VW Caddy (2K)
    • +0000097 = VW Eos (1F)
  • Suspension:
    • +0000640 = Standard Suspension
  • Tire Pressure Monitoring (TPMS):
    • +0000000 = with ABS based Tire Pressure Monitoring (PR-7K1/7K6)
    • +0016384 = without ABS based Tire Pressure Monitoring (PR-7K0/7K4/7K8)

Notes: See production codes on car data plate. Coding is the sum of the individual options.

Basic Setting

Sensor for Steering Angle (G85)

For Continental/Teves Brake Electronics MK70, the basic setting needs to be carried out in the Steering Assist control module.


Tire Pressure Monitoring System Reset

Prerequisites:

  • Ignition ON

[Select]
[03 - Brake Electronics]
[Basic Settings - 04]
Group 042
[Go!]
Activate the Basic Setting.
[ON/OFF/Next]
[Done, Go Back]
[Close Controller, Go Back - 06]

  • The Tire Pressure Monitoring Lamp (K220) should blink.
  • Now check the Tire Pressure and correct it if necessary.
  • Press and Hold the Tire Pressure Monitoring Button (E492) AND the ASR/ESP Button (E256) for 2 Seconds.
  • A short Tone should sound after pressing/holding these buttons for 2 Seconds and the blinking should change to a permanent lit Tire Pressure Monitoring Lamp (K220).
  • The Reset is now done and as soon as you let the buttons go the Tire Pressure Monitoring Lamp (K220) should go OFF.
Retrieved from "http://wiki.ross-tech.com/wiki/index.php?title=VW_Golf_(1K)_Brake_Electronics_(MK70)&oldid=8557"