Difference between revisions of "16730/P0346"
From Ross-Tech Wiki
| (2 intermediate revisions by 2 users not shown) | |||
| Line 22: | Line 22: | ||
* '''When found in the 3.2 FSI''' | * '''When found in the 3.2 FSI''' | ||
** Please see TPI 2012630 for information about Camshaft Adjusters binding. | ** Please see TPI 2012630 for information about Camshaft Adjusters binding. | ||
| − | *** If the camshaft adjuster is suspected you may be able to | + | *** If the camshaft adjuster is suspected you may be able to swap the left and right side components to see if the fault code moves (''providing the parts are compatible''). |
| − | + | * On engines with chain driven intake camshaft(s), but belt driven exhaust camshaft(s), verify the number of chain roller links between the intake and exhaust camshafts is correct. Click on thumbnail to enlarge: | |
| + | [[File:Cam_timing_chains.gif|200px]] | ||
| + | * '''When found in a 2.7T''' (or similar V6/V8 engine) make sure the flex-plate (i.e. drive plate) is installed correctly after engine repairs. The 2.7T BEL will allow you to bolt the flex-plate on incorrectly resulting in [[16730/P0346]] and [[16725/P0341/000833]]. | ||
[[Category:Fault Codes]] | [[Category:Fault Codes]] | ||
Latest revision as of 14:45, 4 June 2018
16730/P0346 - Camshaft Position Sensor (G163): Implausible Signal
Possible Symptoms
- Malfunction Indicator Light (MIL) active
Possible Causes
- Wiring from/to Camshaft Position Sensor (G163) faulty
- Camshaft Position Sensor (G163) faulty
- Timing misaligned
Possible Solutions
- Check Wiring from/to Camshaft Position Sensor (G163)
- Check Camshaft Position Sensor (G163)
- Check Timing
Special Notes
- When found in the 3.2 FSI
- Please see TPI 2012630 for information about Camshaft Adjusters binding.
- If the camshaft adjuster is suspected you may be able to swap the left and right side components to see if the fault code moves (providing the parts are compatible).
- Please see TPI 2012630 for information about Camshaft Adjusters binding.
- On engines with chain driven intake camshaft(s), but belt driven exhaust camshaft(s), verify the number of chain roller links between the intake and exhaust camshafts is correct. Click on thumbnail to enlarge:
- When found in a 2.7T (or similar V6/V8 engine) make sure the flex-plate (i.e. drive plate) is installed correctly after engine repairs. The 2.7T BEL will allow you to bolt the flex-plate on incorrectly resulting in 16730/P0346 and 16725/P0341/000833.