Difference between revisions of "17069/P0685"
From Ross-Tech Wiki
| Line 22: | Line 22: | ||
* When found in a 2005 through 2007 2.5L NAR (North American Region) (1K) Jetta check the T121/62 (''Red/Black'') traced power wire to the ECM. If power is missing or a voltage drop is present that wire may be damaged anywhere between 6" and 18" from the connector itself. This will result in no communication in addition to a no-start. | * When found in a 2005 through 2007 2.5L NAR (North American Region) (1K) Jetta check the T121/62 (''Red/Black'') traced power wire to the ECM. If power is missing or a voltage drop is present that wire may be damaged anywhere between 6" and 18" from the connector itself. This will result in no communication in addition to a no-start. | ||
** Based on 2.5L Jetta feedback over the years a majority look like [http://wiki.ross-tech.com/wiki/images/4/48/Damaged_T121-62_2007_Jetta_2.5L_BGQ_ECM.jpg this example] however some are damaged further away per this example: [http://wiki.ross-tech.com/wiki/images/4/4c/Damaged_T121-62_2006_Jetta_2.5L_ECM.jpg with the close-up and distant views]. | ** Based on 2.5L Jetta feedback over the years a majority look like [http://wiki.ross-tech.com/wiki/images/4/48/Damaged_T121-62_2007_Jetta_2.5L_BGQ_ECM.jpg this example] however some are damaged further away per this example: [http://wiki.ross-tech.com/wiki/images/4/4c/Damaged_T121-62_2006_Jetta_2.5L_ECM.jpg with the close-up and distant views]. | ||
| + | * When found in a Canadian Market (1J) chassis City Golf using engine code BEV, make sure that the B474 splice which powers T121a/62 (''Red/Green'') traced power wire to the ECM isn't corroded. | ||
__FORCETOC__ | __FORCETOC__ | ||
[[Category:Fault Codes]] | [[Category:Fault Codes]] | ||
Latest revision as of 13:12, 3 June 2020
17069/P0685 - ECM Power Relay Control Circuit (J271): Open Circuit
Possible Symptoms
- Malfunction Indicator Light (MIL) ON
- Engine doesn't start
Possible Causes
- Voltage supply issue for ECM
- Faulty ECM Relay (J271)
Possible Solutions
- Test voltage supply to ECM
- Check wiring and fuses
- Replace Faulty ECM Relay (J271)
Special Notes
- When found in a 2005 through 2007 2.5L NAR (North American Region) (1K) Jetta check the T121/62 (Red/Black) traced power wire to the ECM. If power is missing or a voltage drop is present that wire may be damaged anywhere between 6" and 18" from the connector itself. This will result in no communication in addition to a no-start.
- Based on 2.5L Jetta feedback over the years a majority look like this example however some are damaged further away per this example: with the close-up and distant views.
- When found in a Canadian Market (1J) chassis City Golf using engine code BEV, make sure that the B474 splice which powers T121a/62 (Red/Green) traced power wire to the ECM isn't corroded.
