02214

02214 - Tire Pressure Warning

02214 - Tire Pressure Warning: Defective

Possible Symptoms

• Tire Pressure Monitoring not working

Possible Solutions

• Reset Tire Pressure Monitoring

Special Notes

• When found in Seat Exeo (3R): Tire Pressure Monitoring II, perform System Reset.
  • Press/Hold the Tire Pressure Monitoring Button (E226) for at least 5 Seconds to Reset the Calibration.
  • Clear/check Fault Codes.
  • Switch the Ignition OFF.
  • Check/correct the Tire Pressure.
  • Switch the Ignition ON.
  • Press/Hold the Tire Pressure Monitoring Button (E226) for at least 5 Seconds to Reset the Calibration again until the Tire Pressure Monitoring Lamp in the Instrument Cluster briefly lights up.
• When found in VW Golf (1K) or similar: Brake Electronics (MK60), perform System Reset
• When found in VW Golf (1K) or similar: Brake Electronics (MK70), perform System Reset
• When found in VW Passat (3C): Brake Electronics, perform System Reset
• When found in 2014-2015 Golf Mk6 based vehicles with MK60EC1 ABS check applicable TSBs and recalls. The following part numbers are noted for setting this DTC prior to the dealer level software updates:
  • 1K0 907 379 BM with problematic software level 0163 and 0164
  • 1K0 907 379 BS with problematic software level 0165
    • NAR (North American Region) Market Jetta, Beetle and Beetle Convertible see the 45D7 recall
      • https://static.nhtsa.gov/odi/tsbs/2014/MC-10121604-9999.pdf NHTSA
    • RoW (Rest of World) market Jetta and Beetle see TPI: 2037662 (or 2038535)
      • Regardless of market the module will show 1K0 907 379 BS with software level 0166 (or higher) after the update was performed.