Bentley Continental (3W) Brake Electronics (Bosch 5.7): Difference between revisions
Table Of Contents
- 1. Coding II
- 2. Coding
- 3. Basic Setting
- 4. Video Link
No edit summary |
|||
| (6 intermediate revisions by 3 users not shown) | |||
| Line 1: | Line 1: | ||
__FORCETOC__ | __FORCETOC__ | ||
== | == Coding II == | ||
'''''Note #1''': After the Coding-2 (Login) has been carried out you need to Recode the control module then perform the Steering Angle Sensor Calibration. Do NOT exit the Control Module in between the individual steps.''<br> | '''''Note #1''': After the Coding-2 (Login) has been carried out you need to Recode the control module then perform the Steering Angle Sensor Calibration. Do NOT exit the Control Module in between the individual steps.''<br> | ||
* 03121 = Bentley Continental Flying Spur ( | * 03121 = Bentley Continental Flying Spur (3W2/BY611) | ||
* 02121 = Bentley Continental GT/Cabrio ( | * 02121 = Bentley Continental GT/Cabrio (3W3/BY614 - 3W4/BY615) | ||
* 02321 = Bentley Continental GT Diamond Series (3W3/BY614) | |||
== | == Coding == | ||
'''''Note #1''': Coding is accepted after a specific login has been carried out.''<br> | '''''Note #1''': Coding is accepted after a specific login has been carried out.''<br> | ||
'''''Note #2''': After successful coding the steering angle sensor basic setting needs to be carried out.''<br> | '''''Note #2''': After successful coding the steering angle sensor basic setting needs to be carried out.''<br> | ||
'''''Note #3''': In some cases, you will need to enter a non-zero WorkShop Code, such as 12345.''<br> | |||
* 0006878 = Bentley Continental Flying Spur ( | * 0006878 = Bentley Continental Flying Spur (3W2/BY611) | ||
* 0007878 = Bentley Continental GT/Cabrio ( | * 0007878 = Bentley Continental GT/Cabrio (3W3/BY614 - 3W4/BY615) | ||
* 0007678 = Bentley Continental GT Diamond Series (3W3/BY614) | |||
== Basic Setting == | == Basic Setting == | ||
| Line 24: | Line 25: | ||
Before starting the procedure turn the steering wheel at least 30 ° left and back straight ahead.<br> | Before starting the procedure turn the steering wheel at least 30 ° left and back straight ahead.<br> | ||
Verify the steering wheel is centered by moving the vehicle moving straight ahead (less than 20KMH/15MPH).<br> | |||
'''[Meas. Blocks - 08]'''<br> | |||
'''[Meas. Blocks - 08]'''<br> | '''[Meas. Blocks - 08]'''<br> | ||
Group 005 Field 1 (Steering Angle Sensor -G85-)<br> | Group 005 Field 1 (Steering Angle Sensor -G85-)<br> | ||
| Line 45: | Line 49: | ||
'''[Close Controller, Go Back - 06]'''<br> | '''[Close Controller, Go Back - 06]'''<br> | ||
== Video Link == | |||
=== Bosch 5.3 and 5.7 ABS with ESP, Coding === | |||
[[File:Titlescreen.jpg|200px|link=http://www.youtube.com/watch?v=G7YRiVYrLjo]] | |||
http://www.youtube.com/watch?v=G7YRiVYrLjo | |||
Latest revision as of 14:54, 20 July 2022
Coding II
Note #1: After the Coding-2 (Login) has been carried out you need to Recode the control module then perform the Steering Angle Sensor Calibration. Do NOT exit the Control Module in between the individual steps.
- 03121 = Bentley Continental Flying Spur (3W2/BY611)
- 02121 = Bentley Continental GT/Cabrio (3W3/BY614 - 3W4/BY615)
- 02321 = Bentley Continental GT Diamond Series (3W3/BY614)
Coding
Note #1: Coding is accepted after a specific login has been carried out.
Note #2: After successful coding the steering angle sensor basic setting needs to be carried out.
Note #3: In some cases, you will need to enter a non-zero WorkShop Code, such as 12345.
- 0006878 = Bentley Continental Flying Spur (3W2/BY611)
- 0007878 = Bentley Continental GT/Cabrio (3W3/BY614 - 3W4/BY615)
- 0007678 = Bentley Continental GT Diamond Series (3W3/BY614)
Basic Setting
Steering Angle Sensor (G85) Calibration
Before starting the procedure turn the steering wheel at least 30 ° left and back straight ahead.
Verify the steering wheel is centered by moving the vehicle moving straight ahead (less than 20KMH/15MPH).
[Meas. Blocks - 08]
[Meas. Blocks - 08]
Group 005 Field 1 (Steering Angle Sensor -G85-)
Specification: 0.0 °
Tolerance (when straight): ±5.0 °
[Done, Go Back]
[Coding II - 11]
Enter 40168
[Do It!]
[Basic Settings - 04]
Group 001
[Go!]
[Done, Go Back]
[Fault Codes - 02]
All fault codes should have disappeared.
[Done, Go Back]
[Close Controller, Go Back - 06]
Video Link
Bosch 5.3 and 5.7 ABS with ESP, Coding
No categories.