00515: Difference between revisions

Latest revision as of 15:05, 15 November 2007

Some older engines store this code as long as the engine is not running, if in doubt read fault codes with the engine running again.

@@ Line 20: / Line 20: @@
-=== 00515 - Camshaft Position (Hall) Sensor (G40): Open or Short to B+ ===
+=== 00515 - Camshaft Position (Hall) Sensor (G40): Implausible Signal ===
+==== Possible Causes ====
+* Camshaft Timing Out of Specification
+* Wiring to Camshaft Position (Hall) Sensor (G40) faulty
+* Camshaft Position (Hall) Sensor (G40) faulty
+* Engine Control Module faulty
+==== Possible Solutions ====
+* Check Camshaft Timing
+* Check Wiring to Camshaft Position (Hall) Sensor (G40)
+* Check/Replace Camshaft Position (Hall) Sensor (G40)
+* Check/Replace Engine Control Module
+=== 00515 - Camshaft Position (Hall) Sensor (G40): Open or Short to Plus ===
 ==== Possible Causes ====
@@ Line 35: / Line 52: @@
 * Check Camshaft Timing
 * Check/Replace Engine Control Module
+=== 00515 - Camshaft Position (Hall) Sensor (G40): Short to Ground ===
+==== Possible Symptoms ====
+* Power Loss
+* Emissions not OK
+* High Fuel Consumption
+==== Possible Causes ====
+* Wiring to Camshaft Position (Hall) Sensor (G40) faulty
+* Camshaft Position (Hall) Sensor (G40) faulty
+==== Possible Solutions ====
+* Check Wiring to Camshaft Position (Hall) Sensor (G40)
+* Check/Replace Camshaft Position (Hall) Sensor (G40)
 [[Category:Fault Codes]]