Difference between revisions of "18000/P1592/005522"
From Ross-Tech Wiki
RtWiKiSyS0p (talk | contribs) m |
|||
(One intermediate revision by one other user not shown) | |||
Line 9: | Line 9: | ||
==== Possible Causes ==== | ==== Possible Causes ==== | ||
+ | * Ground Spots corroded | ||
* Wiring from/to Boost Pressure Sensor (G31) faulty | * Wiring from/to Boost Pressure Sensor (G31) faulty | ||
− | |||
* Boost Pressure Sensor (G31) faulty | * Boost Pressure Sensor (G31) faulty | ||
==== Possible Solutions ==== | ==== Possible Solutions ==== | ||
− | * Check Wiring from/to Boost Pressure Sensor (G31) | + | * Check/Clean Ground Spots |
− | * Check | + | * Check/Replace Wiring from/to Boost Pressure Sensor (G31) |
− | + | * Check/Replace Boost Pressure Sensor (G31) | |
==== Special Notes ==== | ==== Special Notes ==== | ||
− | * When found in 2.0l TDI-PPD | + | * When found in 2.0l TDI-PPD, check for matching TSB/TPI (i.e. VW TPI 2012601 and/or 2026831). |
− | ** | + | ** Check/Clean Ground Spots |
− | ** | + | ** Check/Replace Wiring Harness for Boost Pressure Sensor (G31) and Intake Air Temperature Sensor (G42) |
+ | ** Check/Update Engine Control Module Software/Firmware | ||
[[Category:Fault Codes]] | [[Category:Fault Codes]] |
Latest revision as of 12:18, 15 September 2014
18000/P1592/005522 - Altitude Sensor / Boost Pressure Sensor: Implausible Correlation
Possible Symptoms
- Malfunction Indicator Light (MIL) active
- Limp Mode active
Possible Causes
- Ground Spots corroded
- Wiring from/to Boost Pressure Sensor (G31) faulty
- Boost Pressure Sensor (G31) faulty
Possible Solutions
- Check/Clean Ground Spots
- Check/Replace Wiring from/to Boost Pressure Sensor (G31)
- Check/Replace Boost Pressure Sensor (G31)
Special Notes
- When found in 2.0l TDI-PPD, check for matching TSB/TPI (i.e. VW TPI 2012601 and/or 2026831).
- Check/Clean Ground Spots
- Check/Replace Wiring Harness for Boost Pressure Sensor (G31) and Intake Air Temperature Sensor (G42)
- Check/Update Engine Control Module Software/Firmware