Exhaust Gas Recirculation (EGR) Valve Adaptation: Difference between revisions
From Ross-Tech Wiki
No edit summary |
No edit summary |
||
| (One intermediate revision by one other user not shown) | |||
| Line 1: | Line 1: | ||
__NOTOC__ | |||
== Most VW/Audi/Seat/Skoda gasoline engines with Exhaust Gas Recirculation (EGR) == | == Most VW/Audi/Seat/Skoda gasoline engines with Exhaust Gas Recirculation (EGR) == | ||
| Line 5: | Line 5: | ||
* Ignition ON | * Ignition ON | ||
* Engine OFF | * Engine OFF | ||
* Battery voltage | * Battery voltage: 12.5 V or higher | ||
'''[Select]'''<br> | '''[Select]'''<br> | ||
| Line 21: | Line 21: | ||
'''[Switch to Measuring Blocks]'''<br> | '''[Switch to Measuring Blocks]'''<br> | ||
'''[Close Controller, Go Back - 06]'''<br><br> | '''[Close Controller, Go Back - 06]'''<br><br> | ||
'''<u>Special Notes:</u>'''<br> | |||
* For ECU's using ME 7.5, the coolant temp needs to be between 10 and 50 °C. | |||
* In case the adaptation fails switch OFF the Ignition for 30 Seconds, then switch it ON and try again. | |||
Latest revision as of 15:41, 28 September 2022
Most VW/Audi/Seat/Skoda gasoline engines with Exhaust Gas Recirculation (EGR)
Prerequisites (General):
- Ignition ON
- Engine OFF
- Battery voltage: 12.5 V or higher
[Select]
[01 - Engine]
[Meas. Blocks - 08]
Select Group 074.
[Go!]
MVB 074.1: Min Position in Volts
MVB 074.2: Max Position in Volts
MVB 074.3: Potentiometer voltage
MVB 074.4: Adaption status: (Run/OK/etc)
[Switch to Basic Settings]
MVB 074.4: Adaption status: (Run) then it should change to (ADP OK)
[Switch to Measuring Blocks]
[Close Controller, Go Back - 06]
Special Notes:
- For ECU's using ME 7.5, the coolant temp needs to be between 10 and 50 °C.
- In case the adaptation fails switch OFF the Ignition for 30 Seconds, then switch it ON and try again.
No categories.