Difference between revisions of "01130"
From Ross-Tech Wiki
RtWiKiSyS0p (talk | contribs) (New page: __FORCETOC__ == 01130 - ABS Operation == === 01130 - ABS Operation: Implausible Signal === ==== Possible Causes ==== * Wiring from/to Brake Electronics (J104) faulty ** Electrical Inter...) |
RtWiKiSyS0p (talk | contribs) |
||
| Line 6: | Line 6: | ||
==== Possible Causes ==== | ==== Possible Causes ==== | ||
| − | * Wiring from/to Brake Electronics (J104) faulty | + | * Fuse(s) faulty |
| + | * Modifications/Retrofits incompatible | ||
| + | * Wiring from/to Brake Electronics Control Module (J104) faulty | ||
** Electrical Interference from External Sources | ** Electrical Interference from External Sources | ||
*** High Frequency Radiation (e.g. non-insulated Ignition Cable) | *** High Frequency Radiation (e.g. non-insulated Ignition Cable) | ||
| + | * Brake Electronics Control Module (J104) faulty | ||
==== Possible Solutions ==== | ==== Possible Solutions ==== | ||
| − | * Check Wiring from/to Brake Electronics (J104) | + | * Check Fuse(s) |
| + | * Check Vehicle for Modifications/Retrofits | ||
| + | ** Temporarily remove Modifications/Retrofits (including Wiring) | ||
| + | * Check Wiring from/to Brake Electronics Control Module (J104) | ||
| + | * Check Brake Electronics Control Module (J104) | ||
| + | |||
| + | ==== Special Notes ==== | ||
| + | |||
| + | * This Fault Code can only be cleared after performing a Test Drive above 20 km/h (13 mph). | ||
[[Category:Fault Codes]] | [[Category:Fault Codes]] | ||
Latest revision as of 06:49, 14 November 2011
01130 - ABS Operation
01130 - ABS Operation: Implausible Signal
Possible Causes
- Fuse(s) faulty
- Modifications/Retrofits incompatible
- Wiring from/to Brake Electronics Control Module (J104) faulty
- Electrical Interference from External Sources
- High Frequency Radiation (e.g. non-insulated Ignition Cable)
- Electrical Interference from External Sources
- Brake Electronics Control Module (J104) faulty
Possible Solutions
- Check Fuse(s)
- Check Vehicle for Modifications/Retrofits
- Temporarily remove Modifications/Retrofits (including Wiring)
- Check Wiring from/to Brake Electronics Control Module (J104)
- Check Brake Electronics Control Module (J104)
Special Notes
- This Fault Code can only be cleared after performing a Test Drive above 20 km/h (13 mph).