Difference between revisions of "Audi A6 (4B) Brake Electronics (Bosch 5.7)"
RtWiKiSyS0p (talk | contribs) m |
|||
| (11 intermediate revisions by 4 users not shown) | |||
| Line 1: | Line 1: | ||
| − | |||
== Login == | == Login == | ||
| − | '''''Note #1''': | + | '''''Note #1''': After Login has been carried out you need to recode the control module.''<br> |
| − | '''''Note #2''': | + | '''''Note #2''': Special Login 07499 is used for 6-Cylinder Diesel Engine with 1LG Brakes and Multitronic.''<br> |
| + | '''''Note #3''': The Production Codes (PR-Code) such as '''1LX''' can be found on a Sticker near the Spare Tire Well and/or the 1st Page of the Service Manual. Click [[Production Codes (PR-Codes) can be found on the Vehicle Data Label | here to see an Example of a Sticker]].''<br> | ||
| + | |||
*'''0?xxx''': ''Chassis'' | *'''0?xxx''': ''Chassis'' | ||
| Line 21: | Line 22: | ||
**9 = 6/8 Cyl. Gasoline | **9 = 6/8 Cyl. Gasoline | ||
*'''0xxx?''': ''Transmission'' | *'''0xxx?''': ''Transmission'' | ||
| − | **5 = Manual | + | **5 = Manual Transmission |
| − | **7 = Automatic | + | **7 = Automatic Transmission (01L/01N/01V) |
| − | **9 = Multitronic | + | **9 = Continuously Variable Transmission (CVT) / Multitronic (01J) |
| Line 31: | Line 32: | ||
'''''Note #2''': After successful coding the steering angle sensor basic setting needs to be carried out.''<br> | '''''Note #2''': After successful coding the steering angle sensor basic setting needs to be carried out.''<br> | ||
'''''Note #3''': Special Coding 06399 is used for 6-Cylinder Diesel Engine with 1LG Brakes and Multitronic.''<br> | '''''Note #3''': Special Coding 06399 is used for 6-Cylinder Diesel Engine with 1LG Brakes and Multitronic.''<br> | ||
| + | '''''Note #4''': The Production Codes (PR-Code) such as '''1LX''' can be found on a Sticker near the Spare Tire Well and/or the 1st Page of the Service Manual. Click [[Production Codes (PR-Codes) can be found on the Vehicle Data Label | here to see an Example of a Sticker]].''<br> | ||
| + | '''''Note #5''': In some cases, you will need to enter a non-zero WorkShop Code, such as 12345.''<br> | ||
*'''0?xxx''': ''Chassis'' | *'''0?xxx''': ''Chassis'' | ||
| Line 48: | Line 51: | ||
**9 = 6/8 Cyl. Gasoline | **9 = 6/8 Cyl. Gasoline | ||
*'''0xxx?''': ''Transmission'' | *'''0xxx?''': ''Transmission'' | ||
| − | **5 = Manual | + | **5 = Manual Transmission |
| − | **7 = Automatic | + | **7 = Automatic Transmission (01L/01N/01V) |
| − | **9 = Multitronic | + | **9 = Continuously Variable Transmission (CVT) / Multitronic (01J) |
| − | |||
== Basic Setting == | == Basic Setting == | ||
| Line 57: | Line 59: | ||
=== Steering Angle Sensor (G85) Calibration === | === Steering Angle Sensor (G85) Calibration === | ||
| − | + | Before starting the procedure turn the steering wheel at least 30 ° left and back straight ahead.<br> | |
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
'''[Meas. Blocks - 08]'''<br> | '''[Meas. Blocks - 08]'''<br> | ||
| Line 84: | Line 80: | ||
'''[Done, Go Back]'''<br> | '''[Done, Go Back]'''<br> | ||
| − | + | ==== Special Notes ==== | |
| + | |||
| + | * Some of the Bosch 5.7 modules will not show live Steering Angle Sensor (G85) readings after the Login and Coding are performed. If this is the case -2.5 ° may be stuck in Measuring Block 005 and will not change when the wheel is turned. Make the wheels as straight as possible and continue with the Steering Angle Sensor (G85) Calibration. | ||
| + | |||
| + | * After doing the G85 Calibration, you may get a 01486 - System Function Test Active, this is normal. Please see [[01486]]. | ||
| + | |||
| + | |||
| + | == Video Link == | ||
| + | === Bosch 5.3 and 5.7 ABS with ESP, Coding === | ||
| + | |||
| + | [[File:Titlescreen.jpg|200px|link=http://www.youtube.com/watch?v=G7YRiVYrLjo]] | ||
| + | |||
| + | http://www.youtube.com/watch?v=G7YRiVYrLjo | ||
| + | |||
| + | |||
| + | __FORCETOC__ | ||
Latest revision as of 16:39, 8 October 2012
Login
Note #1: After Login has been carried out you need to recode the control module.
Note #2: Special Login 07499 is used for 6-Cylinder Diesel Engine with 1LG Brakes and Multitronic.
Note #3: The Production Codes (PR-Code) such as 1LX can be found on a Sticker near the Spare Tire Well and/or the 1st Page of the Service Manual. Click here to see an Example of a Sticker.
- 0?xxx: Chassis
- 6 = Audi A6 Light Armored
- 7 = Audi A6
- 0x?xx: Brakes
- 1 = 2FNR 42 AL 18" (PR-1LJ/1LP)
- 2 = 2FNR 42 AL 17" (PR-1LL)
- 3 = FN3 16" (PR-1LF/1LT)
- 4 = HP2 16" (PR-1LX)
- 4 = FNR 16" (PR-1LA/1LG)
- 5 = FN3 15" (PR-1LB/1LE)
- 6 = C54 (PR-1LZ)
- 0xx?x: Engine
- 5 = 4/6 Cyl. Diesel
- 7 = 4/5 Cyl. Gasoline
- 9 = 6/8 Cyl. Gasoline
- 0xxx?: Transmission
- 5 = Manual Transmission
- 7 = Automatic Transmission (01L/01N/01V)
- 9 = Continuously Variable Transmission (CVT) / Multitronic (01J)
Coding
Note #1: Coding is accepted after a specific login has been carried out.
Note #2: After successful coding the steering angle sensor basic setting needs to be carried out.
Note #3: Special Coding 06399 is used for 6-Cylinder Diesel Engine with 1LG Brakes and Multitronic.
Note #4: The Production Codes (PR-Code) such as 1LX can be found on a Sticker near the Spare Tire Well and/or the 1st Page of the Service Manual. Click here to see an Example of a Sticker.
Note #5: In some cases, you will need to enter a non-zero WorkShop Code, such as 12345.
- 0?xxx: Chassis
- 6 = Audi A6
- 7 = Audi A6 Light Armored
- 0x?xx: Brakes
- 1 = C54 (PR-1LZ)
- 2 = FN3 15" (PR-1LB/1LE)
- 3 = HP2 16" (PR-1LX)
- 3 = FNR 16" (PR-1LA/1LG)
- 4 = FN3 16" (PR-1LF/1LT)
- 5 = 2FNR 42 AL 17" (PR-1LL)
- 6 = 2FNR 42 AL 18" (PR-1LJ/1LP)
- 0xx?x: Engine
- 5 = 4/6 Cyl. Diesel
- 7 = 4/5 Cyl. Gasoline
- 9 = 6/8 Cyl. Gasoline
- 0xxx?: Transmission
- 5 = Manual Transmission
- 7 = Automatic Transmission (01L/01N/01V)
- 9 = Continuously Variable Transmission (CVT) / Multitronic (01J)
Basic Setting
Steering Angle Sensor (G85) Calibration
Before starting the procedure turn the steering wheel at least 30 ° left and back straight ahead.
[Meas. Blocks - 08]
Group 005 Field 1 (Steering Angle Sensor -G85-)
Specification: 0.0 °
Tolerance (when straight): ±5.0 °
[Done, Go Back]
[Login - 11]
Enter 40168
[Do It!]
[Basic Settings - 04]
Group 001
[Go!]
[Done, Go Back]
[Fault Codes - 02]
All fault codes should have disappeared.
[Done, Go Back]
Special Notes
- Some of the Bosch 5.7 modules will not show live Steering Angle Sensor (G85) readings after the Login and Coding are performed. If this is the case -2.5 ° may be stuck in Measuring Block 005 and will not change when the wheel is turned. Make the wheels as straight as possible and continue with the Steering Angle Sensor (G85) Calibration.
- After doing the G85 Calibration, you may get a 01486 - System Function Test Active, this is normal. Please see 01486.
Video Link
Bosch 5.3 and 5.7 ABS with ESP, Coding
http://www.youtube.com/watch?v=G7YRiVYrLjo