Difference between revisions of "Audi A8 (4E) Battery Replacement"

Latest revision as of 13:57, 10 May 2016

The information that was on this page moved to the Battery Replacement page.

@@ Line 1: / Line 1: @@
 __FORCETOC__
-'''This procedure details how to replace a battery in a vehicle using a separate battery management control module. See the separate instructions for models where the battery management control module is a slave/subsystem of the gateway.'''
-''The following procedure does assume you are using a battery supplied by VW/Audi, all necessary details for the following steps can found on the battery itself.''
+The information that was on this page moved to the [[Battery Replacement]] page.
-'''[Select]'''<br>
-'''[61 - Battery Regulation]'''<br>
-'''[Coding - 07]'''<br>
-'''[Battery Coding Assistant]'''<br>
-* Enter the new Battery Part Number (10 or 11 digits).
-* Enter the new Battery Serial Number (10 digits).
-* Select the new Battery Vendor.
-'''[OK]'''<br>
-'''[Do it!]'''<br>
-'''[Close Controller, Go Back - 06]'''<br>
-Your new Battery should now be coded and the Battery Control Module should be aware of the new Battery.