Audi TT (8J)Automatic Roof: Difference between revisions

From Ross-Tech Wiki

Table Of Contents

Peter (talk | contribs)
502 edits
Created page with "__FORCETOC__ == Coding == Not Applicable == Adaptation == When performing repairs/replacement of the Flap Motors it will be necessary to perform the Adaption of the Flap Mo..."
 
Dana (talk | contribs)
1,750 edits
No edit summary
 
(4 intermediate revisions by 2 users not shown)
Line 6: Line 6:
== Adaptation ==
== Adaptation ==


When performing repairs/replacement of the Flap Motors it will be necessary to perform the
After repairs/replacement of the Flap Motors it will be necessary to perform the
Adaption of the Flap Motors.  
Adaption of the Flap Motors. Useful references include:<br>


Ref: TSB 61-09-02 or 2018777 for NAR (North American Region) vehicles.<br>
* NAR (North American Region) TSB 61-09-02 or 2018777
The faults associated with the bulletins include: [[02000]], [[03246]], and [[03247]].  
* NAR (North American Region) TPI 2015779:
** https://static.nhtsa.gov/odi/tsbs/2013/MC-10121348-9999.pdf NHTSA
* The faults associated with the bulletins include: [[02000]], [[03246]], and [[03247]]. <br>


Perform Output Test on both right and left Flap Motors.
 
After diagnosis and repairs perform the following Output Test:


'''[Select]'''<br>
'''[Select]'''<br>
'''[26 - Auto Roof]'''<br>
'''[26 - Auto Roof]'''<br>
'''[Output Tests - 03]'''<br>
'''[Output Tests - 03]'''<br>
'''[Select]''' Selective Output Tests
'''[Select]''' Selective Output Tests<br>
 
'''[Choose]'''''Convertible Top Flap Initialisation'' <br>
'''[Choose]''' - Motor for Convertible Top Flap Left (V383) <br>
'''[Start]'''<br>
'''[Start]'''
'''Operate''' the Convertible Top throughout a complete Open/Close sequence BEFORE exiting the Output Test function.<br>
 
Wait until the Flap has open and closed, <br> '''[Choose]''' - Motor for Convertible Top Flap Right (V381)<br>
'''[Start]'''
 
Wait until the Flap has open and closed, then
 
'''Operate''' the Convertible Top 3 times, Open/close = 1 time, do this 2 more times.  
 
'''[Done, Go Back]'''<br>
'''[Done, Go Back]'''<br>
'''[Close Controller, Go Back - 06]'''<br><br>
'''[Close Controller, Go Back - 06]'''<br><br>
Check Measuring Value Blocks Group 008 to verify correct values of the Flap Motors.


'''Important Note:'''
This thread contains 8J chassis  [26-Auto Roof] data:
* You must operate the Convertible Top before exiting the Output Tests Window.
* https://www.ttforum.co.uk/threads/faq-mk2-roadster-convertible-measurement-blocks-fault-codes-adaptation.2019023/
* If you do not operate the Top, the adaption of the flaps will not be learnt!
** Members of our Ross-Tech forum can post in this thread http://forums.ross-tech.com/showthread.php?14543-VCDS-Module-for-Audi-TT-Mk2-(8J)-Roadster-26-Auto-Roof-Group-Codes

Latest revision as of 16:25, 18 October 2024

Coding

Not Applicable

Adaptation

After repairs/replacement of the Flap Motors it will be necessary to perform the Adaption of the Flap Motors. Useful references include:


After diagnosis and repairs perform the following Output Test:

[Select]
[26 - Auto Roof]
[Output Tests - 03]
[Select] Selective Output Tests
[Choose]Convertible Top Flap Initialisation
[Start]
Operate the Convertible Top throughout a complete Open/Close sequence BEFORE exiting the Output Test function.
[Done, Go Back]
[Close Controller, Go Back - 06]

This thread contains 8J chassis [26-Auto Roof] data:

Retrieved from "https://wiki.ross-tech.com/wiki/index.php?title=Audi_TT_(8J)Automatic_Roof&oldid=9611"
Contact Privacy Accessibility