Difference between revisions of "01087"

From Ross-Tech Wiki
 
(One intermediate revision by one other user not shown)
Line 19: Line 19:
 
==== Special Notes ====
 
==== Special Notes ====
  
*  When found in [[6-Speed_Direct_Shift_Gearbox_(DSG/02E) |6-Speed Direct Shift Gearbox (DSG/02E)]], perform [[6-Speed_Direct_Shift_Gearbox_(DSG/02E)#Basic_Setting | Basic Settings]]
+
*  When found in [[6-Speed_Direct_Shift_Gearbox_(DSG/02E) |6-Speed Direct Shift Gearbox (DSG/02E)]], perform [[6-Speed_Direct_Shift_Gearbox_(DSG/02E)#Basic_Setting | Basic Settings]].
 +
*  When found in [[Audi A5 (8T) Active Steering | Audi 1B-Active Steering (J792)]], perform [[Audi A5 (8T) Active Steering#Basic_Setting | Basic Settings]].
 +
* When found in [[Audi_A5_(8T)_Parking_Brake|Audi A4/S4/RS4/Cabriolet (8K): Parking Brake]], perform [[Audi_A5_(8T)_Parking_Brake#Function_Test|Function Test]].
 
* When found in [[Audi_A6_(4F)_Parking_Brake|Audi A6 (4F): Parking Brake]], perform [[Audi_A6_(4F)_Parking_Brake#Function_Test|Function Test]].
 
* When found in [[Audi_A6_(4F)_Parking_Brake|Audi A6 (4F): Parking Brake]], perform [[Audi_A6_(4F)_Parking_Brake#Function_Test|Function Test]].
 
* When found in [[VW_Passat_(3C)_Parking_Brake|VW Passat (3C): Parking Brake]], perform [[VW_Passat_(3C)_Parking_Brake#Function_Test|Function Test]].
 
* When found in [[VW_Passat_(3C)_Parking_Brake|VW Passat (3C): Parking Brake]], perform [[VW_Passat_(3C)_Parking_Brake#Function_Test|Function Test]].
 
** If the [[VW_Passat_(3C)_Parking_Brake#Function_Test|Function Test]] does not clear the code, perform [[VW Passat (3C) Brake Electronics#Longitudinal Acceleration Sensor (G251)|Longitudinal Acceleration Sensor (G251) Calibration]].
 
** If the [[VW_Passat_(3C)_Parking_Brake#Function_Test|Function Test]] does not clear the code, perform [[VW Passat (3C) Brake Electronics#Longitudinal Acceleration Sensor (G251)|Longitudinal Acceleration Sensor (G251) Calibration]].
 +
  
 
[[Category:Fault Codes]]
 
[[Category:Fault Codes]]

Latest revision as of 09:11, 22 April 2015

01087 - Basic Setting Not Performed

Possible Symptoms

  • Malfunction Indicator Light (MIL) ON
  • Function Limitation
  • Control Module Coding not possible

Possible Causes

  • Basic Setting not performed

Possible Solutions

Special Notes