Difference between revisions of "03803"
From Ross-Tech Wiki
(Created page with "== 03803 - Steering Angle Sensor for Steering Aid: No or Incorrect Basic Setting / Adaptation == ==== Possible Symptoms ==== * Malfunction Indicator Light (MIL) active ====...") |
|||
| Line 8: | Line 8: | ||
* Power Steering Rack replaced | * Power Steering Rack replaced | ||
| + | * G85 Steering Angle Sensor not calibrated. Common example includes DTC [[00778]] | ||
==== Possible Solutions ==== | ==== Possible Solutions ==== | ||
| + | * Calibrate G85per the applicable [[Diagnostic Procedures]] page. | ||
* Flashing the correct Characteristic Curve to the Steering Assist Control Module | * Flashing the correct Characteristic Curve to the Steering Assist Control Module | ||
** See [[VW Golf (1K) Steering Assist]] for more information on Characteristic Curve | ** See [[VW Golf (1K) Steering Assist]] for more information on Characteristic Curve | ||
Latest revision as of 13:23, 16 May 2016
03803 - Steering Angle Sensor for Steering Aid: No or Incorrect Basic Setting / Adaptation
Possible Symptoms
- Malfunction Indicator Light (MIL) active
Possible Causes
- Power Steering Rack replaced
- G85 Steering Angle Sensor not calibrated. Common example includes DTC 00778
Possible Solutions
- Calibrate G85per the applicable Diagnostic Procedures page.
- Flashing the correct Characteristic Curve to the Steering Assist Control Module
- See VW Golf (1K) Steering Assist for more information on Characteristic Curve