B2005: Difference between revisions
From Ross-Tech Wiki
Table Of Contents
-
1.
B2005 - Invalid data record
- 1.1.1 Possible Symptoms
- 1.2.1 Possible Causes
- 1.3.1 Possible Solutions
- 1.4.1 Special Notes
No edit summary |
No edit summary |
||
| (One intermediate revision by one other user not shown) | |||
| Line 1: | Line 1: | ||
__FORCETOC__ | __FORCETOC__ | ||
=== B2005 - Invalid data record === | === B2005 - Invalid data record === | ||
==== Possible Symptoms ==== | |||
* Controller functions limitation | |||
==== Possible Causes ==== | |||
* The parameter data stored in the control unit is incorrect. | |||
==== Possible Solutions ==== | |||
* Update the software with the factory scan tool ODIS, follow the instructions in TSB 2011732: 00 Software Version Management (SVM), operating instructions. | |||
==== Special Notes ==== | ==== Special Notes ==== | ||
* This fault usually means there's a bug in the factory firmware, parameter related data in the control unit is incorrect or parameter data is missing because the module has not been configured via SVM with a direct connection to VW/Audi headquarters. | * This fault usually means there's a bug in the factory firmware, parameter related data in the control unit is incorrect or parameter data is missing because the module has not been configured via SVM with a direct connection to VW/Audi headquarters. | ||
* When found in the BA-Motor Mounts (J931) control module (typically in conjunction with [[B2010]]) on | * When found in the BA-Motor Mounts (J931) control module (typically in conjunction with [[B2010]]) on Audi vehicles with 4.0T engine see: | ||
** NAR (North American) Market TPI 2036392 | ** NAR (North American) Market TPI 2036392 | ||
*** https://static.nhtsa.gov/odi/tsbs/2017/MC-10128212-9999.pdf NHTSA | |||
**** 2013-2015 S6/S7/RS7/A8/R8 with 4.0T engine | |||
** RoW (Rest of World) Market TPI 2036309 | ** RoW (Rest of World) Market TPI 2036309 | ||
*** Those TPIs discuss Audi SVM code BAA001 for the flash update in addition to a mechanical adjustment and Basic Setting procedure. The RoW document includes the S8 model. | *** Those TPIs discuss Audi SVM code BAA001 for the flash update in addition to a mechanical adjustment and Basic Setting procedure. The RoW document includes the S8 model. | ||
[[Category:Fault Codes]] | [[Category:Fault Codes]] | ||
Latest revision as of 18:32, 8 September 2025
B2005 - Invalid data record
Possible Symptoms
- Controller functions limitation
Possible Causes
- The parameter data stored in the control unit is incorrect.
Possible Solutions
- Update the software with the factory scan tool ODIS, follow the instructions in TSB 2011732: 00 Software Version Management (SVM), operating instructions.
Special Notes
- This fault usually means there's a bug in the factory firmware, parameter related data in the control unit is incorrect or parameter data is missing because the module has not been configured via SVM with a direct connection to VW/Audi headquarters.
- When found in the BA-Motor Mounts (J931) control module (typically in conjunction with B2010) on Audi vehicles with 4.0T engine see:
- NAR (North American) Market TPI 2036392
- https://static.nhtsa.gov/odi/tsbs/2017/MC-10128212-9999.pdf NHTSA
- 2013-2015 S6/S7/RS7/A8/R8 with 4.0T engine
- https://static.nhtsa.gov/odi/tsbs/2017/MC-10128212-9999.pdf NHTSA
- RoW (Rest of World) Market TPI 2036309
- Those TPIs discuss Audi SVM code BAA001 for the flash update in addition to a mechanical adjustment and Basic Setting procedure. The RoW document includes the S8 model.
- NAR (North American) Market TPI 2036392