Difference between revisions of "VW Golf (1K) Brake Electronics (MK70)"
From Ross-Tech Wiki
RtWiKiSyS0p (talk | contribs) m |
RtWiKiSyS0p (talk | contribs) |
||
| Line 23: | Line 23: | ||
''For Continental/Teves Brake Electronics MK70, the basic setting needs to be carried out in the [[VW Golf (1K) Steering Assist#Basic Setting|Steering Assist]] control module.'' | ''For Continental/Teves Brake Electronics MK70, the basic setting needs to be carried out in the [[VW Golf (1K) Steering Assist#Basic Setting|Steering Assist]] control module.'' | ||
| + | |||
| + | |||
| + | === Tire Pressure Monitoring System Reset === | ||
| + | |||
| + | '''<u>Prerequisites:</u>'''<br> | ||
| + | * Ignition ON<br><br> | ||
| + | |||
| + | '''[Select]'''<br> | ||
| + | '''[03 - Brake Electronics]'''<br> | ||
| + | '''[Basic Settings - 04]'''<br> | ||
| + | Group 042<br> | ||
| + | '''[Go!]'''<br> | ||
| + | Activate the Basic Setting.<br> | ||
| + | '''[ON/OFF/Next]'''<br> | ||
| + | '''[Done, Go Back]'''<br> | ||
| + | '''[Close Controller, Go Back - 06]'''<br><br> | ||
| + | * The Tire Pressure Monitoring Lamp (K220) should blink. | ||
| + | * Now check the Tire Pressure and correct it if necessary. | ||
| + | * Press and Hold the Tire Pressure Monitoring Button (E492) '''AND''' the ASR/ESP Button (E256) for 2 Seconds. | ||
| + | * A short Tone should sound after pressing/holding these buttons for 2 Seconds and the blinking should change to a permanent lit Tire Pressure Monitoring Lamp (K220). | ||
| + | * The Reset is now done and as soon as you let the buttons go the Tire Pressure Monitoring Lamp (K220) should go OFF. | ||
Revision as of 05:23, 2 April 2009
Coding
ABS (MK70)
- Model:
- +0000001 = Audi A3 (8P) / Seat Leon (1P) / VW Golf/Jetta (1K)
- +0000065 = VW Touran (1T)
- +0000082 = VW Caddy (2K)
- +0000097 = VW Eos (1F)
- Suspension:
- +0000640 = Standard Suspension
- Tire Pressure Monitoring (TPMS):
- +0000000 = with Tire Pressure Monitoring (PR-7K1/7K6)
- +0016384 = without Tire Pressure Monitoring (PR-7K0)
Notes: See production codes on car data plate. Coding is the sum of the individual options.
Basic Setting
Sensor for Steering Angle (G85)
For Continental/Teves Brake Electronics MK70, the basic setting needs to be carried out in the Steering Assist control module.
Tire Pressure Monitoring System Reset
Prerequisites:
- Ignition ON
[Select]
[03 - Brake Electronics]
[Basic Settings - 04]
Group 042
[Go!]
Activate the Basic Setting.
[ON/OFF/Next]
[Done, Go Back]
[Close Controller, Go Back - 06]
- The Tire Pressure Monitoring Lamp (K220) should blink.
- Now check the Tire Pressure and correct it if necessary.
- Press and Hold the Tire Pressure Monitoring Button (E492) AND the ASR/ESP Button (E256) for 2 Seconds.
- A short Tone should sound after pressing/holding these buttons for 2 Seconds and the blinking should change to a permanent lit Tire Pressure Monitoring Lamp (K220).
- The Reset is now done and as soon as you let the buttons go the Tire Pressure Monitoring Lamp (K220) should go OFF.