02426: Difference between revisions
From Ross-Tech Wiki
Table Of Contents
-
1.
02426 - Brake Disk Left Rear; Not Reached
- 1.1.1 Possible Symptoms
- 1.2.1 Possible Causes
- 1.3.1 Possible Solutions
- 1.4.1 Special Notes
RtWiKiSyS0p (talk | contribs) New page: __FORCETOC__ == 02426 - Brake Disk Left Rear; Not Reached == ==== Possible Symptoms ==== * Malfunction Indicator Lamp (MIL) active * Function Limitation ==== Possible Causes ==== * Th... |
RtWiKiSyS0p (talk | contribs) No edit summary |
||
| Line 9: | Line 9: | ||
==== Possible Causes ==== | ==== Possible Causes ==== | ||
* | * Left Parking Brake Motor (V282) Power Supply faulty | ||
* Left Parking Brake Motor (V282) faulty | |||
==== Possible Solutions ==== | ==== Possible Solutions ==== | ||
* Clear Fault Codes | * Clear Fault Codes | ||
* Replace Left Parking Brake Motor (V282) | * Check Left Parking Brake Motor (V282) Power Supply | ||
* Check/Replace Left Parking Brake Motor (V282) | |||
** Check Shut-Off Current, See Measuring Value Block (MVB) 003.1 & 003.2 | |||
==== Special Notes ==== | |||
* This Fault will be set if the Parking Brake Motor runs for 20 Seconds while the Shut-Off Current isn't reached and the Wheel can still be turned. A possible Scenario would be operating the Parking Brake without a Brake Disc being installed/present, i.e. no End Position is being defined and may result in Damage to the Parking Brake Motor. | |||
* Make sure to cycle the Parking Brake a couple of times between checking for Fault Codes, this will ensure that the Control Module tests the related Components again. | |||
[[Category:Fault Codes]] | [[Category:Fault Codes]] | ||
Revision as of 01:25, 1 June 2008
02426 - Brake Disk Left Rear; Not Reached
Possible Symptoms
- Malfunction Indicator Lamp (MIL) active
- Function Limitation
Possible Causes
- Left Parking Brake Motor (V282) Power Supply faulty
- Left Parking Brake Motor (V282) faulty
Possible Solutions
- Clear Fault Codes
- Check Left Parking Brake Motor (V282) Power Supply
- Check/Replace Left Parking Brake Motor (V282)
- Check Shut-Off Current, See Measuring Value Block (MVB) 003.1 & 003.2
Special Notes
- This Fault will be set if the Parking Brake Motor runs for 20 Seconds while the Shut-Off Current isn't reached and the Wheel can still be turned. A possible Scenario would be operating the Parking Brake without a Brake Disc being installed/present, i.e. no End Position is being defined and may result in Damage to the Parking Brake Motor.
- Make sure to cycle the Parking Brake a couple of times between checking for Fault Codes, this will ensure that the Control Module tests the related Components again.