Difference between revisions of "17743/P1335"
From Ross-Tech Wiki
(Created page with '__FORCETOC__ == 17743/P1335 - Engine Torque Monitor 2: Control Limit Exceeded == ==== Possible Symptoms ==== * Malfunction Indicator Light (MIL) ON * Reduced Power ==== Poss…') |
|||
| Line 14: | Line 14: | ||
* Mass Air Flow Sensor (G70) faulty | * Mass Air Flow Sensor (G70) faulty | ||
* Engine Coolant Temperature sensor faulty | * Engine Coolant Temperature sensor faulty | ||
| + | * Restricted Air or Fuel Filters | ||
==== Possible Solutions ==== | ==== Possible Solutions ==== | ||
| Line 21: | Line 22: | ||
* Check Mass Air Flow Sensor (G70) | * Check Mass Air Flow Sensor (G70) | ||
* Check Engine Coolant Temperature sensor | * Check Engine Coolant Temperature sensor | ||
| + | * Check Air and Fuel Filters | ||
==== Special Notes ==== | ==== Special Notes ==== | ||
* Check O2 Sensor(s) Adaptation Values Before Clearing Faults: [[Fuel Trim Info|Fuel Trim Information]] | * Check O2 Sensor(s) Adaptation Values Before Clearing Faults: [[Fuel Trim Info|Fuel Trim Information]] | ||
Latest revision as of 13:13, 26 August 2010
17743/P1335 - Engine Torque Monitor 2: Control Limit Exceeded
Possible Symptoms
- Malfunction Indicator Light (MIL) ON
- Reduced Power
Possible Causes
- Intake hose(s) or intake system leaks (Unmetered Air) after MAF
- Intake Air Temperature sensor faulty
- Mass Air Flow Sensor (G70) faulty
- Engine Coolant Temperature sensor faulty
- Restricted Air or Fuel Filters
Possible Solutions
- Check intake hose(s) or intake system for leaks (Unmetered Air) after MAF
- Check Intake Air Temperature sensor
- Check Mass Air Flow Sensor (G70)
- Check Engine Coolant Temperature sensor
- Check Air and Fuel Filters
Special Notes
- Check O2 Sensor(s) Adaptation Values Before Clearing Faults: Fuel Trim Information