Audi A6 (4F) Brake Electronics: Difference between revisions
From Ross-Tech Wiki
Table Of Contents
- 1. Coding
-
2.
Basic Setting
-
2.1.2
Steering Angle Sensor (G85) Calibration
- 2.1.1.3 Special Note
-
2.1.2
Steering Angle Sensor (G85) Calibration
| Line 31: | Line 31: | ||
'''[Close Controller, Go Back - 06]'''<br> | '''[Close Controller, Go Back - 06]'''<br> | ||
==== Special | ==== Special Note ==== | ||
* After doing the G85 Calibration, you may get a 01486 - System Function Test Active, this is normal. Please see [[01486]]. | * After doing the G85 Calibration, you may get a 01486 - System Function Test Active, this is normal. Please see [[01486]]. | ||
Revision as of 20:16, 1 August 2011
Coding
- +0016384 = Trailer Hitch not installed or w/o Control Module for Trailer/Towing Sensor (J345)
Basic Setting
Steering Angle Sensor (G85) Calibration
[Select]
[03 - ABS Brakes]
Turn steering wheel at least 30 ° left and back straight ahead.
[Security Access - 16]
Enter 40168
[Do It!]
[Basic Settings - 04]
Group 001
[Go!]
Activate the Basic Setting.
[ON/OFF/Next]
After a successful basic setting, field 3 should say "OK".
[Done, Go Back]
[Fault Codes - 02]
All fault codes should have disappeared.
[Done, Go Back]
[Close Controller, Go Back - 06]
Special Note
- After doing the G85 Calibration, you may get a 01486 - System Function Test Active, this is normal. Please see 01486.
No categories.