Difference between revisions of "19143/P2711/010001"
From Ross-Tech Wiki
| Line 28: | Line 28: | ||
** Check Measuring Value Block (MVB) 008. The Output Shaft Speeds should align with the Input Shaft Speed during a Test Drive (Tiptronic in Gear 1/2) with the Clutch engaged. | ** Check Measuring Value Block (MVB) 008. The Output Shaft Speeds should align with the Input Shaft Speed during a Test Drive (Tiptronic in Gear 1/2) with the Clutch engaged. | ||
** According to Skoda TPI 2024152 an updated Clutch Set is available which addresses these issues. | ** According to Skoda TPI 2024152 an updated Clutch Set is available which addresses these issues. | ||
| − | * When found in 2009 to 2012 Jetta, Eos, CC and 2012 Passat DSG (02E) | + | * When found in 2009 to 2012 Jetta, Eos, CC and 2012 Passat with DSG (02E) |
| + | ** Please see VW TSB 30-14-03, August 7, 2014 (TPI 2028714) . | ||
| + | **Replacement of the " multiple clutch and cover" maybe necessary, "If the Transmission Control Module has fault code P2711 (only)". | ||
=== 19143/P2711/010001 - Unexpected / Implausible Mechanical Gear Disengagement: No or Incorrect Basic Setting / Adaptation === | === 19143/P2711/010001 - Unexpected / Implausible Mechanical Gear Disengagement: No or Incorrect Basic Setting / Adaptation === | ||
Revision as of 10:19, 4 September 2015
19143/P2711/010001 - Unexpected / Implausible Mechanical Gear Disengagement
19143/P2711/010001 - Unexpected / Implausible Mechanical Gear Disengagement: No Signal/Communication
Possible Symptoms
- Malfunction Indicator Light (MIL) ON
- Transmission Malfunction
- Erratic Driving Behavior
Possible Causes
- Double Clutch worn/faulty
- Worn/Damaged gear shaft(s)
- Output Shaft Speed Sensor 1/2 (G501/G502) faulty
- Mechatronic Unit for Double Clutch Transmission (J743) faulty
Possible Solutions
- Check Output Shaft Speed Sensor 1/2 (G501/G502)
- Check Measuring Value Blocks (MVB)
- Check/Replace Double Clutch
- Check/Replace Mechatronic Unit for Double Clutch Transmission (J743)
Special Notes
- When found in 6-Speed Direct Shift Gearbox (DSG/02E):
- Check Measuring Value Block (MVB) 008. The Output Shaft Speeds should align with the Input Shaft Speed during a Test Drive (Tiptronic in Gear 1/2) with the Clutch engaged.
- According to Skoda TPI 2024152 an updated Clutch Set is available which addresses these issues.
- When found in 2009 to 2012 Jetta, Eos, CC and 2012 Passat with DSG (02E)
- Please see VW TSB 30-14-03, August 7, 2014 (TPI 2028714) .
- Replacement of the " multiple clutch and cover" maybe necessary, "If the Transmission Control Module has fault code P2711 (only)".
19143/P2711/010001 - Unexpected / Implausible Mechanical Gear Disengagement: No or Incorrect Basic Setting / Adaptation
Special Notes
- When found in 6-Speed Direct Shift Gearbox (DSG/02E), perform Basic Setting.