Difference between revisions of "01222"

From Ross-Tech Wiki
 
Line 68: Line 68:
 
** Install correct Crash Sensor Side Airbag; Passenger Side (G180)
 
** Install correct Crash Sensor Side Airbag; Passenger Side (G180)
 
* Check Wiring/Connections between Airbag Control Module (J234) and Crash Sensor Side Airbag; Passenger Side (G180)
 
* Check Wiring/Connections between Airbag Control Module (J234) and Crash Sensor Side Airbag; Passenger Side (G180)
 +
 +
==== Special Notes ====
 +
 +
* When found on 2019 - 2022 Atlas, Atlas Cross Sport, Golf, Golf Wagon, Jetta, Tiguan and Taos, please see TT 97-21-02 for possible wiring harness issue:
 +
** https://static.nhtsa.gov/odi/tsbs/2022/MC-10208280-0001.pdf  NHTSA
 +
*** May also find DTCs U0199, U0200, B1017 or B1036.
  
 
[[Category:Fault Codes]]
 
[[Category:Fault Codes]]

Latest revision as of 15:33, 12 May 2022

01222 - Crash Sensor Side Airbag; Passenger Side (G180)

01222 - Crash Sensor Side Airbag; Passenger Side (G180): Faulty

01222 - Crash Sensor Side Airbag; Passenger Side (G180): Open or Short to Plus

Possible Symptoms

  • Airbag Warning Light ON

Possible Causes

  • Wiring/Connections between Airbag Control Module (J234) and Crash Sensor Side Airbag; Passenger Side (G180) faulty
  • Crash Sensor Side Airbag; Passenger Side (G180) faulty
  • Airbag Control Module (J234) faulty

Possible Solutions

  • Check Wiring/Connections between Airbag Control Module (J234) and Crash Sensor Side Airbag; Passenger Side (G180)
  • Replace Crash Sensor Side Airbag; Passenger Side (G180)
  • Replace Airbag Control Module (J234)


01222 - Crash Sensor Side Airbag; Passenger Side (G180): No or Incorrect Basic Setting / Adaptation

Possible Symptoms

  • Airbag Warning Light ON

Possible Causes

  • Wrong Crash Sensor Side Airbag; Passenger Side (G180) installed
  • Newly Installed Airbag Module is Not Compatible With Crash Sensor(s)

Possible Solutions

  • Install correct Crash Sensor Side Airbag; Passenger Side (G180)
  • Install Airbag Module that is Compatible With Crash Sensor(s)

Special Notes

  • The US Market (9M) Jetta has a common Airbag Control Module replacement conflict with the existing Crash Sensors. This is mentioned in TSB # 69-08-04 (TPI-2011170) with the following example:
    • When control module 1C0-909-605-F-004 (coded to 12340) is replaced with 1C0-909-605-F-01E the original Crash Sensors are not compatible. The new module will refuse coding if DTCs 01221, 01222, 01738, or 1739 are stored. This is also noted here: Airbag Coding

The Crash Sensors can be checked by using the control module identification and the measuring blocks.

Address 15: Airbags
   Controller: 1T0 909 605 
   Component: 05 AIRBAG VW62 0506 2112
   Coding: 0012341

The 0506 in this example stands for the required Crash Sensor ID, the first 2 digits (05) apply for the front crash sensors, while the second 2 digits (06) apply for the rear crash sensors. The ID of the currently installed Crash Sensors can be determined by checking Measuring Value Block (MVB) 009.

01222 - Crash Sensor Side Airbag; Passenger Side (G180): Implausible Signal

Possible Symptoms

  • Airbag Warning Light ON

Possible Causes

  • Wrong/Incompatible Crash Sensor Side Airbag; Passenger Side (G180) installed
  • Wiring/Connections between Airbag Control Module (J234) and Crash Sensor Side Airbag; Passenger Side (G180) faulty

Possible Solutions

  • Check Crash Sensor Side Airbag; Passenger Side (G180) Part Number
    • Install correct Crash Sensor Side Airbag; Passenger Side (G180)
  • Check Wiring/Connections between Airbag Control Module (J234) and Crash Sensor Side Airbag; Passenger Side (G180)

Special Notes