Difference between revisions of "VAG-COM-FAQ-1.1"
| Line 1: | Line 1: | ||
1.1 Will VAG-COM work with my car? | 1.1 Will VAG-COM work with my car? | ||
| − | [http://www.ross-tech.com/vag-com/ VAG-COM] will work with most Volkswagen and Audi models sold World-Wide 1994 through 2006. It will work with some cars all the way back to model year 1990. It will also work with most late-model SEAT, and Skoda models sold in markets other than North America. If your VW or Audi has a 16-pin "OBD-II style" Data Link Connector, VAG-COM will definitely work. If your car has the old "2x2" Data Link Connection, check if there is a wire going to each pin, as shown in the picture. If there are four wires, VAG-COM should work. If there are only three, it won't. Please see these Application Charts where you can select your model and see which modules can communicate with VAG-COM. Also see the Issues page for a few things that may not work as expected. If in doubt, e-mail us. | + | [http://www.ross-tech.com/vag-com/ VAG-COM] will work with most Volkswagen and Audi models sold World-Wide 1994 through 2006. It will work with some cars all the way back to model year 1990. It will also work with most late-model SEAT, and Skoda models sold in markets other than North America. If your VW or Audi has a 16-pin "OBD-II style" Data Link Connector, VAG-COM will definitely work. If your car has the old "2x2" Data Link Connection, check if there is a wire going to each pin, as shown in the picture. If there are four wires, VAG-COM should work. If there are only three, it won't. Please see these Application Charts where you can select your model and see which modules can communicate with VAG-COM. Also see the Issues page for a few things that may not work as expected. If in doubt, [mailto:support@ross-tech.com e-mail us]. |
Revision as of 12:12, 26 January 2006
1.1 Will VAG-COM work with my car?
VAG-COM will work with most Volkswagen and Audi models sold World-Wide 1994 through 2006. It will work with some cars all the way back to model year 1990. It will also work with most late-model SEAT, and Skoda models sold in markets other than North America. If your VW or Audi has a 16-pin "OBD-II style" Data Link Connector, VAG-COM will definitely work. If your car has the old "2x2" Data Link Connection, check if there is a wire going to each pin, as shown in the picture. If there are four wires, VAG-COM should work. If there are only three, it won't. Please see these Application Charts where you can select your model and see which modules can communicate with VAG-COM. Also see the Issues page for a few things that may not work as expected. If in doubt, e-mail us.