Difference between revisions of "18434/P2002/008194"
From Ross-Tech Wiki
RtWiKiSyS0p (talk | contribs) |
RtWiKiSyS0p (talk | contribs) m |
||
| Line 20: | Line 20: | ||
==== Special Notes ==== | ==== Special Notes ==== | ||
| − | * Skoda Superb (3U) & VW Passat (3B) (Engine Codes: BGW, BSS, BWW) had issues with faulty Exhaust Pressure Sensors (G450), they were defective from factory and due to a leaking sealing the measured values were incorrect and resultet in wrong calculated particle filter load and unsuccessful regeneration cycles. | + | * Skoda Superb (3U) & VW Passat (3B) ''(Engine Codes: BGW, BSS, BWW)'' had issues with faulty Exhaust Pressure Sensors (G450), they were defective from factory and due to a leaking sealing the measured values were incorrect and resultet in wrong calculated particle filter load and unsuccessful regeneration cycles. |
[[Category:Fault Codes]] | [[Category:Fault Codes]] | ||
Revision as of 07:05, 1 September 2006
18434/P2002/008194 - Particle Filter Bank 1: Malfunction
Possible Symptoms
- Malfunction Indication Lamp (MIL) active
Possible Causes
- Exhaust Pressure Sensor (G450) faulty
- Diesel Particle Filter (DPF) faulty
Possible Solutions
- Check/Replace Exhaust Pressure Sensor (G450)
- Diesel Particle Filter (DPF)
- Perform Regeneration (Refer to Specifications!)
- Check/Replace Diesel Particle Filter (DPF)
Special Notes
- Skoda Superb (3U) & VW Passat (3B) (Engine Codes: BGW, BSS, BWW) had issues with faulty Exhaust Pressure Sensors (G450), they were defective from factory and due to a leaking sealing the measured values were incorrect and resultet in wrong calculated particle filter load and unsuccessful regeneration cycles.