00515: Difference between revisions
From Ross-Tech Wiki
Table Of Contents
-
1.
00515 - Camshaft Position (Hall) Sensor (G40)
-
1.1.1
00515 - Camshaft Position (Hall) Sensor (G40): No Signal
- 1.1.1.2 Possible Causes
- 1.1.2.2 Possible Solutions
- 1.1.3.2 Special Notes
-
1.2.1
00515 - Camshaft Position (Hall) Sensor (G40): Open or Short to Plus
- 1.2.1.6 Possible Causes
- 1.2.2.6 Possible Solutions
-
1.3.1
00515 - Camshaft Position (Hall) Sensor (G40): Short to Ground
- 1.3.1.9 Possible Symptoms
- 1.3.2.9 Possible Causes
- 1.3.3.9 Possible Solutions
-
1.1.1
00515 - Camshaft Position (Hall) Sensor (G40): No Signal
RtWiKiSyS0p (talk | contribs) mNo edit summary |
RtWiKiSyS0p (talk | contribs) mNo edit summary |
||
| Line 20: | Line 20: | ||
=== 00515 - Camshaft Position (Hall) Sensor (G40): Open or Short to | === 00515 - Camshaft Position (Hall) Sensor (G40): Open or Short to Plus === | ||
==== Possible Causes ==== | ==== Possible Causes ==== | ||
| Line 35: | Line 35: | ||
* Check Camshaft Timing | * Check Camshaft Timing | ||
* Check/Replace Engine Control Module | * Check/Replace Engine Control Module | ||
=== 00515 - Camshaft Position (Hall) Sensor (G40): Short to Ground === | |||
==== Possible Symptoms ==== | |||
* Power Loss | |||
* Emissions not OK | |||
* High Fuel Consumption | |||
==== Possible Causes ==== | |||
* Wiring to Camshaft Position (Hall) Sensor (G40) faulty | |||
* Camshaft Position (Hall) Sensor (G40) faulty | |||
==== Possible Solutions ==== | |||
* Check Wiring to Camshaft Position (Hall) Sensor (G40) | |||
* Check/Replace Camshaft Position (Hall) Sensor (G40) | |||
[[Category:Fault Codes]] | [[Category:Fault Codes]] | ||
Revision as of 12:50, 13 February 2007
00515 - Camshaft Position (Hall) Sensor (G40)
00515 - Camshaft Position (Hall) Sensor (G40): No Signal
Possible Causes
- Wiring to Camshaft Position (Hall) Sensor (G40) faulty
- Camshaft Position (Hall) Sensor (G40) faulty
Possible Solutions
- Check Wiring to Camshaft Position (Hall) Sensor (G40)
- Check/Replace Camshaft Position (Hall) Sensor (G40)
- Check/Replace Engine Control Module
Special Notes
- Some older engines store this code as long as the engine is not running, if in doubt read fault codes with the engine running again.
00515 - Camshaft Position (Hall) Sensor (G40): Open or Short to Plus
Possible Causes
- Wiring to Camshaft Position (Hall) Sensor (G40) faulty
- Camshaft Position (Hall) Sensor (G40) Installation faulty
- Camshaft Timing Out of Specification
- Camshaft Position (Hall) Sensor (G40) faulty
Possible Solutions
- Check Wiring to Camshaft Position (Hall) Sensor (G40)
- Check/Replace Camshaft Position (Hall) Sensor (G40)
- Check Camshaft Timing
- Check/Replace Engine Control Module
00515 - Camshaft Position (Hall) Sensor (G40): Short to Ground
Possible Symptoms
- Power Loss
- Emissions not OK
- High Fuel Consumption
Possible Causes
- Wiring to Camshaft Position (Hall) Sensor (G40) faulty
- Camshaft Position (Hall) Sensor (G40) faulty
Possible Solutions
- Check Wiring to Camshaft Position (Hall) Sensor (G40)
- Check/Replace Camshaft Position (Hall) Sensor (G40)