Difference between revisions of "Trailer Hitch Retrofitting (7L)"

From Ross-Tech Wiki
 
m
 
Line 1: Line 1:
 +
'''''Note''': Some sections are marked with 7LA (pre-facelift) and 7L6 (facelift), please decide yourself which one you have.''<br>
 +
 
__FORCETOC__
 
__FORCETOC__
== CAN-Gateway ==
+
== CAN-Gateway (7L6 only) ==
  
 
'''[Select]'''<br>
 
'''[Select]'''<br>
 
'''[19 - CAN-Gateway]'''<br>
 
'''[19 - CAN-Gateway]'''<br>
''If the control module does NOT support long coding, proceed to the Trailer Control Module Coding (Gateway doesn't need to be recoded).''<br>
 
 
'''[Coding - 07]'''<br>
 
'''[Coding - 07]'''<br>
 
'''[Long Coding Helper]'''<br>
 
'''[Long Coding Helper]'''<br>

Latest revision as of 13:43, 29 June 2007

Note: Some sections are marked with 7LA (pre-facelift) and 7L6 (facelift), please decide yourself which one you have.


CAN-Gateway (7L6 only)

[Select]
[19 - CAN-Gateway]
[Coding - 07]
[Long Coding Helper]
Set Byte 03 Bit 1 = [69] Trailer active.
[Do It!]
[Close Controller, Go Back - 06]


Trailer Control Module

NOTE: This part varies depending on the type of the trailer control module. There are 2 variants available, those which are diagnostic capable and those who are not.

Variant #1: Trailer Control Module (#69) NOT diagnostic capable

Nothing to do here, so leave it alone.

Variant #2: Trailer Control Module (#69) diagnostic capable

This control module requires a coding, see VAG-COM coding help or vehicle specific coding table for details.


Others

If installed the following modules may need to be recoded/adapted.