Difference between revisions of "17755/P1347/004935"
From Ross-Tech Wiki
RtWiKiSyS0p (talk | contribs) |
RtWiKiSyS0p (talk | contribs) m |
||
| Line 4: | Line 4: | ||
==== Possible Causes ==== | ==== Possible Causes ==== | ||
| − | * Timing Belt incorrectly installed | + | * Timing Belt/Chain incorrectly installed |
| + | ** Timing Chain probably lengthened | ||
* Camshaft Position Sensor 2 (G163) faulty | * Camshaft Position Sensor 2 (G163) faulty | ||
* Engine Speed Sensor (G28) faulty | * Engine Speed Sensor (G28) faulty | ||
| Line 10: | Line 11: | ||
==== Possible Solutions ==== | ==== Possible Solutions ==== | ||
| − | * Check Timing Belt installation | + | * Check Timing Belt/Chain installation |
| + | ** Use Measuring Value Blocks (MVB) to Check Timing Chain | ||
* Check/Replace Camshaft Position Sensor 2 (G163) | * Check/Replace Camshaft Position Sensor 2 (G163) | ||
* Check/Replace Engine Speed Sensor (G28) | * Check/Replace Engine Speed Sensor (G28) | ||
| + | |||
[[Category:Fault Codes]] | [[Category:Fault Codes]] | ||
Revision as of 08:50, 30 July 2007
17755/P1347/004935 - Camshaft Position Sensor 2 (G163) / Engine Speed Sensor (G28): Incor. Correl.
Possible Causes
- Timing Belt/Chain incorrectly installed
- Timing Chain probably lengthened
- Camshaft Position Sensor 2 (G163) faulty
- Engine Speed Sensor (G28) faulty
Possible Solutions
- Check Timing Belt/Chain installation
- Use Measuring Value Blocks (MVB) to Check Timing Chain
- Check/Replace Camshaft Position Sensor 2 (G163)
- Check/Replace Engine Speed Sensor (G28)