Difference between revisions of "VW Passat (3B) Brake Electronics (Bosch 5.7)"
(→Coding) |
|||
| Line 2: | Line 2: | ||
== Login == | == Login == | ||
| − | '''''Note #1''': | + | '''''Note #1''': After Login has been carried out you need to recode the control module.''<br> |
| − | '''''Note #2''': ''The PR | + | '''''Note #2''': Special Login 07499 is used for 6-Cylinder Diesel Engine with 1LG Brakes and Multitronic.''<br> |
| + | '''''Note #3''': The Production Codes (PR-Code) such as '''1LX''' can be found on a Sticker near the Spare Tire Well and/or the 1st Page of the Service Manual. Click [http://www.ross-tech.net/vag-com/misc-images/PR-Codes.png here to see an Example of a Sticker].''<br> | ||
*'''0?xxx''': ''Chassis'' | *'''0?xxx''': ''Chassis'' | ||
| Line 25: | Line 26: | ||
'''''Note #1''': Coding is accepted after a specific login has been carried out.''<br> | '''''Note #1''': Coding is accepted after a specific login has been carried out.''<br> | ||
'''''Note #2''': After successful coding the steering angle sensor basic setting needs to be carried out.''<br> | '''''Note #2''': After successful coding the steering angle sensor basic setting needs to be carried out.''<br> | ||
| − | '''''Note #3''': | + | '''''Note #3''': The Production Codes (PR-Code) such as '''1LX''' can be found on a Sticker near the Spare Tire Well and/or the 1st Page of the Service Manual. Click [http://www.ross-tech.net/vag-com/misc-images/PR-Codes.png here to see an Example of a Sticker].''<br> |
*'''0?xxx''': ''Chassis'' | *'''0?xxx''': ''Chassis'' | ||
| Line 47: | Line 48: | ||
=== Steering Angle Sensor (G85) Calibration === | === Steering Angle Sensor (G85) Calibration === | ||
| − | + | Before starting the procedure turn the steering wheel at least 30 ° left and back straight ahead.<br> | |
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
'''[Meas. Blocks - 08]'''<br> | '''[Meas. Blocks - 08]'''<br> | ||
| Line 75: | Line 68: | ||
All fault codes should have disappeared.<br> | All fault codes should have disappeared.<br> | ||
'''[Done, Go Back]'''<br> | '''[Done, Go Back]'''<br> | ||
| − | + | __FORCETOC__ | |
| − | |||
Revision as of 11:37, 9 March 2011
Login
Note #1: After Login has been carried out you need to recode the control module.
Note #2: Special Login 07499 is used for 6-Cylinder Diesel Engine with 1LG Brakes and Multitronic.
Note #3: The Production Codes (PR-Code) such as 1LX can be found on a Sticker near the Spare Tire Well and/or the 1st Page of the Service Manual. Click here to see an Example of a Sticker.
- 0?xxx: Chassis
- 8 = VW Passat W8
- 9 = VW Passat
- 0x?xx: Brakes
- 3 = (PR-1LT/1LF)
- 4 = (PR-1LC/1LX/1ZF/1LZ/1ZG)
- 5 = (PR-1LB/1LE/1ZC)
- 6 = (PR-1LZ/1ZJ)
- 0xx?x: Engine
- 5 = (PR-T5X/T4N/T9J*/T6T/T1K/T1E/T7F*) (* with Brakes: PR-1LB/1LE/1ZC)
- 7 = (PR-T0B/T10/T6V/T0D/T0F)
- 9 = (PR-T7F/T9H/T9J)
- 0xxx?: Transmission
- 5 = Manual (PR-G0C/G0K/G0G/G0L)
- 7 = Automatic (PR-G0E/G0F/G0Q)
Coding
Note #1: Coding is accepted after a specific login has been carried out.
Note #2: After successful coding the steering angle sensor basic setting needs to be carried out.
Note #3: The Production Codes (PR-Code) such as 1LX can be found on a Sticker near the Spare Tire Well and/or the 1st Page of the Service Manual. Click here to see an Example of a Sticker.
- 0?xxx: Chassis
- 4 = VW Passat
- 5 = VW Passat W8
- 0x?xx: Brakes
- 1 = (PR-1LZ/1ZJ)
- 2 = (PR-1LB/1LE/1ZC)
- 3 = (PR-1LC/1LX/1ZF/1LZ/1ZG)
- 4 = (PR-1LT/1LF)
- 0xx?x: Engine
- 5 = (PR-T5X/T4N/T9J*/T6T/T1K/T1E/T7F*) (* with Brakes: PR-1LB/1LE/1ZC)
- 7 = (PR-T0B/T10/T6V/T0D/T0F)
- 9 = (PR-T7F/T9H/T9J)
- 0xxx?: Transmission
- 5 = Manual (PR-G0C/G0K/G0G/G0L)
- 7 = Automatic (PR-G0E/G0F/G0Q)
Basic Setting
Steering Angle Sensor (G85) Calibration
Before starting the procedure turn the steering wheel at least 30 ° left and back straight ahead.
[Meas. Blocks - 08]
Group 005 Field 1 (Steering Angle Sensor -G85-)
Specification: 0.0 °
Tolerance (when straight): ±5.0 °
[Done, Go Back]
[Login - 11]
Enter 40168
[Do It!]
[Basic Settings - 04]
Group 001
[Go!]
[Done, Go Back]
[Fault Codes - 02]
All fault codes should have disappeared.
[Done, Go Back]