Difference between revisions of "Audi TT (8N) Central Locking"
From Ross-Tech Wiki
(Created page with '__FORCETOC__== Coding == == Adaptation == == Special Procedures == === Remote Control Clearing === ''Clearing of all memory potions, e.g. in case of a lost key.''<br> '''[Select…') |
|||
| Line 33: | Line 33: | ||
Channel 021.<br> | Channel 021.<br> | ||
'''[Read]'''<br> | '''[Read]'''<br> | ||
| − | * Choose the memory position you want the new key be matched on by entering it's number (e.g. "3" for memory | + | * Choose the memory position you want the new key be matched on by entering it's number (e.g. "3" for memory position 3). Make sure to TYPE IN the number instead of scrolling up to it, otherwise you will not be able to click [Test]. |
'''[Test]'''<br> | '''[Test]'''<br> | ||
* Now press any button on the remote you want to match. | * Now press any button on the remote you want to match. | ||
Revision as of 12:56, 4 April 2011
Coding
Adaptation
Special Procedures
Remote Control Clearing
Clearing of all memory potions, e.g. in case of a lost key.
[Select]
[35 - Central Locking]
[Adaptation - 10]
Channel 000.
[Read]
[Save] a new value of 0
[Done, Go Back]
[Close Controller, Go Back - 06]
Remote Control Synchronization
- Press any button on remote control.
If vehicle does not respond by locking or unlocking:
- Lock and unlock vehicle within 30 seconds using driver-side lock.
- Now check function of synchronized remote control.
Remote Control Matching
[Select]
[35 - Central Locking]
[Adaptation - 10]
Channel 021.
[Read]
- Choose the memory position you want the new key be matched on by entering it's number (e.g. "3" for memory position 3). Make sure to TYPE IN the number instead of scrolling up to it, otherwise you will not be able to click [Test].
[Test]
- Now press any button on the remote you want to match.
- The meas. block field above will change from Not Recogn. to Recognized.
[Save]
[Done, Go Back]
[Close Controller, Go Back - 06]
Note: You can check the current memory positions using Meas. Block 006.
Special Notes
The 8N platform central locking module has assigned positions, like parking spots 1, 2, 3 and 4, for each remote. This is critical when matching new remotes.
- If you are having problems with the Remote Control Matching, please pay special attention to the instructions above:
- Make sure to TYPE IN the number instead of scrolling up to it, otherwise you will not be able to click [Test].
- Make sure to TYPE IN the number instead of scrolling up to it, otherwise you will not be able to click [Test].