Difference between revisions of "Bentley Continental (3W) Brake Electronics (Bosch 5.7)"
RtWiKiSyS0p (talk | contribs) m |
|||
| Line 1: | Line 1: | ||
__FORCETOC__ | __FORCETOC__ | ||
| − | == | + | == [Coding II - 11] == |
| − | '''''Note''': | + | '''''Note #1''': After the Coding-2 (Login) has been carried out you need to Recode the control module then perform the Steering Angle Sensor Calibration. Do NOT exit the Control Module in between the individual steps.''<br> |
* 03121 = Bentley Continental Flying Spur (3W - BY611) | * 03121 = Bentley Continental Flying Spur (3W - BY611) | ||
| Line 9: | Line 9: | ||
| − | == Coding == | + | == [Coding - 07] == |
'''''Note #1''': Coding is accepted after a specific login has been carried out.''<br> | '''''Note #1''': Coding is accepted after a specific login has been carried out.''<br> | ||
'''''Note #2''': After successful coding the steering angle sensor basic setting needs to be carried out.''<br> | '''''Note #2''': After successful coding the steering angle sensor basic setting needs to be carried out.''<br> | ||
| − | * | + | * 0006878 = Bentley Continental Flying Spur (3W - BY611) |
| − | * | + | * 0007878 = Bentley Continental GT/Cabrio (3W - BY614/BY615) |
| Line 23: | Line 23: | ||
=== Steering Angle Sensor (G85) Calibration === | === Steering Angle Sensor (G85) Calibration === | ||
| − | + | Before starting the procedure turn the steering wheel at least 30 ° left and back straight ahead.<br> | |
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
'''[Meas. Blocks - 08]'''<br> | '''[Meas. Blocks - 08]'''<br> | ||
Group 005 Field 1 (Steering Angle Sensor -G85-)<br> | Group 005 Field 1 (Steering Angle Sensor -G85-)<br> | ||
Specification: 0.0 °<br> | Specification: 0.0 °<br> | ||
| − | Tolerance (when straight): | + | Tolerance (when straight): ±5.0 °<br> |
'''[Done, Go Back]'''<br> | '''[Done, Go Back]'''<br> | ||
| − | '''[ | + | '''[Coding II - 11]'''<br> |
Enter 40168<br> | Enter 40168<br> | ||
'''[Do It!]'''<br> | '''[Do It!]'''<br> | ||
Revision as of 14:45, 27 April 2011
[Coding II - 11]
Note #1: After the Coding-2 (Login) has been carried out you need to Recode the control module then perform the Steering Angle Sensor Calibration. Do NOT exit the Control Module in between the individual steps.
- 03121 = Bentley Continental Flying Spur (3W - BY611)
- 02121 = Bentley Continental GT/Cabrio (3W - BY614/BY615)
[Coding - 07]
Note #1: Coding is accepted after a specific login has been carried out.
Note #2: After successful coding the steering angle sensor basic setting needs to be carried out.
- 0006878 = Bentley Continental Flying Spur (3W - BY611)
- 0007878 = Bentley Continental GT/Cabrio (3W - BY614/BY615)
Basic Setting
Steering Angle Sensor (G85) Calibration
Before starting the procedure turn the steering wheel at least 30 ° left and back straight ahead.
[Meas. Blocks - 08]
Group 005 Field 1 (Steering Angle Sensor -G85-)
Specification: 0.0 °
Tolerance (when straight): ±5.0 °
[Done, Go Back]
[Coding II - 11]
Enter 40168
[Do It!]
[Basic Settings - 04]
Group 001
[Go!]
[Done, Go Back]
[Fault Codes - 02]
All fault codes should have disappeared.
[Done, Go Back]
[Close Controller, Go Back - 06]