Difference between revisions of "Audi A6 (4F) Brake Electronics"
From Ross-Tech Wiki
RtWiKiSyS0p (talk | contribs) m |
|||
| Line 30: | Line 30: | ||
'''[Close Controller, Go Back - 06]'''<br> | '''[Close Controller, Go Back - 06]'''<br> | ||
| + | |||
| + | ==== Special Notes ==== | ||
| + | |||
| + | * After doing the G85 Calibration, you may get a 01486 - System Function Test Active, this is normal. Please see [[01486]]. | ||
Revision as of 15:16, 1 August 2011
Coding
- +0016384 = Trailer Hitch not installed or w/o Control Module for Trailer/Towing Sensor (J345)
Basic Setting
Steering Angle Sensor (G85) Calibration
[Select]
[03 - ABS Brakes]
Turn steering wheel at least 30 ° left and back straight ahead.
[Security Access - 16]
Enter 40168
[Do It!]
[Basic Settings - 04]
Group 001
[Go!]
Activate the Basic Setting.
[ON/OFF/Next]
After a successful basic setting, field 3 should say "OK".
[Done, Go Back]
[Fault Codes - 02]
All fault codes should have disappeared.
[Done, Go Back]
[Close Controller, Go Back - 06]
Special Notes
- After doing the G85 Calibration, you may get a 01486 - System Function Test Active, this is normal. Please see 01486.