02214: Difference between revisions

Revision as of 12:46, 18 March 2013

When found in Seat Exeo (3R): Tire Pressure Monitoring II, perform System Reset.
- Press/Hold the Tire Pressure Monitoring Button (E226) for at least 5 Seconds to Reset the Calibration.
- Once the Calibration has been performed clear/check Fault Codes and check the Tire Pressure.
- Press/Hold the Tire Pressure Monitoring Button (E226) for at least 5 Seconds to Reset the Calibration again until the Tire Pressure Monitoring Lamp in the Instrument Cluster lights up.
When found in VW Golf (1K) or similar: Brake Electronics (MK60), perform System Reset
When found in VW Golf (1K) or similar: Brake Electronics (MK70), perform System Reset
When found in VW Passat (3C): Brake Electronics, perform System Reset

@@ Line 14: / Line 14: @@
 ==== Special Notes ====
+* When found in [[Seat Exeo (3R)]]: [[Tire Pressure Monitoring II]], perform System Reset.
+** Press/Hold the Tire Pressure Monitoring Button (E226) for at least 5 Seconds to Reset the Calibration.
+** Once the Calibration has been performed clear/check Fault Codes and check the Tire Pressure.
+** Press/Hold the Tire Pressure Monitoring Button (E226) for at least 5 Seconds to Reset the Calibration again until the Tire Pressure Monitoring Lamp in the Instrument Cluster lights up.
 * When found in [[VW Golf/Jetta/Bora (1K/5M)|VW Golf (1K)]] or similar: [[VW Golf (1K) Brake Electronics (MK60)|Brake Electronics (MK60)]], perform [[VW Golf (1K) Brake Electronics (MK60)#Tire Pressure Monitoring System Reset|System Reset]]
 * When found in [[VW Golf/Jetta/Bora (1K/5M)|VW Golf (1K)]] or similar: [[VW Golf (1K) Brake Electronics (MK70)|Brake Electronics (MK70)]], perform [[VW Golf (1K) Brake Electronics (MK70)#Tire Pressure Monitoring System Reset|System Reset]]